542979
19
Zoom out
Zoom in
Previous page
1/22
Next page
5. Adjust flab or tight belt All running belt are adjusted before the treadmill leaving
the factory or after assembling, but after a period of time of use, the belt will
become flab, for example: the user will have a feeling of stop when they are using
it. When this kind of phenomenon appears, adjust the running belt adjustable bolts
clockwise and make the two sides equable, adjust them semicycle once This
circumstance is out of guarantee to keep it good repair. The user adjusts it by
oneself, the flabby belt will cause slippage between belt and roller, but more tightly
belt perhaps harms the motor, roller and itself.
6. Adjust slanted running belt
All running belt are adjusted before the treadmill leaving the factory, but after a
period of time of using, the belt will become slanting, it may caused by the
following reasons:
(1) The engine frame is not steady.
(2) The user’s feet are not in the middle of the running belts when they are using it.
(3) The force on the feet is not even. If the running belt is slanted by the user, it can
return to normal after running without anyone for a few minutes.
If the running belt can not return to normal by itself, we can adjust the running belt
regulator with the inner hexagon spanner, adjust it semicycle once. If the running
belt is near the left side, adjust the left bolt clockwise or adjust the right bolt
counter clockwise.(look at picture a) If the running belt is near the right side, adjust
the right bolt clockwise or adjust the left bolt counter clockwise.(look at picture b)
7 Adjust flab or tight belt After a period of using, the running belt will become a
little longer and give us some feeling of stopping when we are running. When this
kind of phenomenon appears, adjust the running belt adjustable bolts clockwise and
make the two sides equable, adjust them semicycle once.(look at picture
c).Continue to do this until the running belt is not skid or slanted. The adjustment
should not exceed 2---3circles every time, and it should not too tight , avoiding the
running belt damaged permanently.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joy Sport Relax Model 2010 loopband at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joy Sport Relax Model 2010 loopband in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info