474887

Joy Sport Master Manual

14
Zoom out
Zoom in
Previous page
1/15
Next page
MAINTENANCE
1.Running board and running belt
● Brief:
The motorized treadmill use imported running belt, it’s with lower friction coefficient, higher
intensity of tension, the running board is specially with double shock absorption system,
it’s special smoothness and abrasion prevention.
● Clean
Keep cleanness of treadmill, it can prolong treadmill’s life, please usually clean the
exposed running board both side of the running belt and foot board. Clean the running
belt by dipped soap water; please note not to let water flow into machine and under the
running belt.
2. Lubricating
The running board/belt must be lubricated by special lubrication after a period of use,
suggestion:
Treadmill works no more than 3 hours every week. It’s lubricated one time every half of
year.
Treadmill works no 3 to 6 hours every week. It’s lubricated one time every 3 months.
Treadmill works more than 6 hours every week. It’s lubricated one time every month.
Superfluous lubrication is not ok, it’s not good with more lubrication, please remember:
reasonable lubricating is a important factor for prolonging treadmill’s life!
3. Evaluation of friction
The friction between running belt and board will be increased as dust or reduced lubrication,
this perhaps can harm motor, controller increased friction is with following character:
(1) When shut off power of treadmill, the running belt can’t be moved or it’s difficult for user
to move by foot.
(2) Pull out safe key when treadmill runs at middle-speed under load state, the running belt
stops at once.
(3) Causing harm of motor of controller, open circuit and the fuse blows.
4. Adjust flab or tight belt
All running belt are adjusted before the treadmill leaving the factory or after assembling,
but after a period of time of use, the belt will become flab, this circumstance sis out of
guarantee to keep it good repair. The user adjust it by oneself., the flabby belt will cause
slippage between belt and roller, but more tightly belt perhaps harms the motor, roller
and itself. Usually, the space of 50-60mm between belt and footboard when pull the side
of belt is reasonable.
<10>
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joy Sport Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joy Sport Master in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info