37750
13
Zoom out
Zoom in
Previous page
1/17
Next page
T600MEP-3 Multi-stage Economizer Thermostat Installation Instructions 13
To set the time schedule for a two-event schedule,
follow the steps in Table 5. See Table 7, Events 1
and 2, for an example of a two-event office schedule.
Programming the Daily Schedule – Four-Event
The schedule-setting menu is used to enter the
occupied and unoccupied states for each day of the
week. The schedule-setting menu reflects either a
two- or four-event schedule per day, based on what
was selected in the 2/4event parameter during the
configuration process. If the schedule-setting menu
does not reflect a four-event schedule, select four
events in the 2/4event parameter of the Installer
Configuration Menu.
When changing the time, press the UP/DOWN arrow
keys once to change the time in 1-minute increments;
press and hold down the keys to change the time in
30-minute increments.
Note: Programming one of the digital inputs to remote
NSB disables the menu.
To set the time schedule for a four-event schedule,
follow the steps in Table 6. See Table 7 for an example
of a four-event office schedule.
Table 5: Programming the Daily Schedule –
Two-Event (Part 1 of 2)
Thermostat
Display
Description
Press the MENU key while in the
Status Display Menu to enter the
Main User Menu.
Press the NO key to all prompts until
the schedule set prompt appears on
the display. Press the YES key to
enter the scheduling menu.
Press the YES key to set the
schedule for Monday or press the NO
key to advance to Tuesday.
Press the YES key to set the
occupied start time for Monday or
press the NO key to advance to
Tuesday. Selecting NO leaves the
thermostat in the unoccupied state
for the entire day.
Press the UP/DOWN arrow keys to
set the occupied start time. Press the
YES key to enter the time.
Press the UP/DOWN arrow keys to
set the unoccupied start time. Press
the YES key to enter the time.
Press the YES key to set the
schedule for Tuesday or press the
NO key to advance to Wednesday.
Press the YES key to copy the
schedule from the previous day.
Press the NO key to set a different
schedule.
RoomTemp
75.0
°
F
Schedule
set? Y/N
Monda
y
set? Y/N
Occupied
day? Y/N
Occupied
12:00 AM
Unoccup
12:00 AM
Tuesda
y
set? Y/N
Cop
y
Y/N
previous
If the YES key was pressed, the next
prompt is for Wednesday. Repeat the
procedure for the rest of the days of
the week.
After setting the schedule for all the
days of the week, following the last
entry for Sunday, press the YES key
to return to the Status Display Menu
or press the NO key to start again at
Monday.
Table 6: Programming the Daily Schedule –
Four-Event (Part 1 of 2)
Thermostat
Display
Description
Press the MENU key from the Status
Display Menu to enter the Main User
Menu.
Press the NO key to all prompts until
the schedule set prompt appears on
the display. Press the YES key to
enter the scheduling menu.
Table 5: Programming the Daily Schedule –
Two-Event (Part 2 of 2)
Thermostat
Display
Description
Wednesda
set? Y/N
Exit?
Y/N
RoomTemp
75.0
°
F
Schedule
set? Y/N
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Johnson Control T600MEP-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Johnson Control T600MEP-3 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info