Manual Jocca Naaimachine 6641 (page 10 of 15) (English, French, Portuguese, Spanish)

605065

Zoom out

Zoom in

1/15

18-E E-19

tion.

-If you detect that the power supply cable or the plug are dama-

ged, do not use the appliance or try to replace the cable yourself.

Go directly to the authorised JOCCA technical service where they

will replace it correctly for you.

-Do not let the power supply cable touch or come near the hot

parts of the appliance.

-Do not immerse the appliance or any part of it in water or any

other liquid.

-Do not pull the cable to unplug the appliance from the mains,

always pull from the plug.

-If your appliance has been dropped or fallen into water or any

other liquid do not use it or try to repair it. Take it to the JOCCA

technical service.

-Never leave the appliance cable hanging or in contact with hot

parts.

-For your safety and for the appliance to work correctly, always

use JOCCA spare parts and accessories. We advise against the

use of adapters, plugs and/or extension cables. If these elements

are essential, only use single or multiple adapters and extension

cables that respect the applicable safety standards, making sure

that the power limit indicated on the adapter and/or the extension

cable is not surpassed.

-Always leave appliance in upright position during pauses in iro-

ning.

-If you have to leave the appliance unsupervised, switch it off

from the mains; never leave your iron unsupervised and connec-

ted to the mains.

-Never leave hot iron on textiles or materials that can easily burn.

-Before starting to iron, make sure that the surface where you put

the iron is stable.

-Do not stand iron on the connection lead.

-Never use this appliance if damaged or danger of having been

submerged in a liquid.

-Before filling the water tank or emptying it, always unplug

appliance from mains.

-Before connecting the appliance to the mains, check that the

water tank is closed.

-When you finish ironing, unplug appliance from mains and

empty the water tank.

-This appliance gives off steam that might cause burns. Never

aim the jet of steam at animals or people and never iron on gar-

ments that someone is wearing.

INSTRUCTIONSFORUSE

-Before using the appliance for the first time, remove all packa-

ging.

-When you use the appliance for the first time, it may produce

some fumes and smells that will quickly stop. Regarding the

steam function, do not try it on clothing the first time you use it, as

there may be some dirt on the inside of the steam chamber which

would leave remains on the garments.

-Before filling or emptying the water tank unplug appliance from

the mains.Fill the water transparent tank until the MAX mark and

place the temperature control in “Min” position.

-Connect the appliance to the mains and check that the water

tank is closed.

-Place the temperature control in the desired position depending

on the garment you wish to iron.(See fabric table included in this

manual).

-You will see that the luminous lamp comes on. This lamp will go

off when the iron reaches the selected temperature.

-After each use, unplug the appliance from the mains and empty

the water tank.

FILLING THE TANK

-This appliance is prepared to be used with clean tap water, with

a higher hardness degree than 17ºdH. The use of distilled or

demineralised water increases the working life of the appliance.

-The tank capacity is for approximately 250 ml, always use the

transparent tank to guide you.

-The waters that cannot be used for this type of iron is mentio-

ned below, as these contain organic residues or mineral elements

subject to causing splashes, yellowish colours, or premature

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jocca Naaimachine 6641 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jocca Naaimachine 6641 Manual

Product: