Manual Jocca 5893 (page 10 of 13) (English, French, Portuguese, Spanish)

553851

Zoom out

Zoom in

1/13

the button I on the control panel and the device will start

operating.

Select the output speed of air you want, the button (5). You

can select three positions:

«I» - low air flow.

«II» - medium air flow.

«III» - maximum air flow.

Press the button to select the desired position.

Button (1). It is used to set the operation time of the device.

When the time is out the device will be automatically

disconnected.

To program it, simply press the button . Each time you press

this button increases the set time a half hour to a total of seven

hours. The lights indicate the scheduled time.

Wind blow mode (4): To select the Wind blow mode of the

device you have to press the key . With this function the air

varies in intensity and direction gradually. If you want the tabs

stay in a certain position, when they are in the desired position,

press the button Wind blow again and the position will be

fixed.

Cold mode: button (3). To get cooler and humid air place ice

in the largest compartment located at the top of the device (e)

or into the lateral water containers (f) and press . With the

light on it also purifies the air, if the light is off, only cool dry air

is coming out.

Function Mode (6): to select the type of wind blow you have

to press the button . There are three types of wind blowing:

sleep mode, natural and normal. Select the desired one.

Remote control: controls the same functions of the device on the

distance of 5 meters.

Unplug the device when you finished using it.

CLEANING AND STORAGE

-Before cleaning the fridge, make sure the device is not plugged

in the current and the water/ice tank is empty.

- To empty the water tank in case of excess of the water or to

clean the device, open the drain plug in the lower back part,

to remove it turn the plug counter clockwise until it is separated

from the device, pull the rubber stopper and drain the water.

Once all the water is out, place the rubber stopper and drain

plug again.

-Please clean the water tank from time to time.

-The filter should be cleaned with a damp cloth approximately

every 15 days.

Steps to be taken to change the filter:

1.- Take the grid out of the filter with the help of a screwdriver.

2.- Take the filter out of its deposit and shake well to clean.

3.- If the filter is too dirty, put it in a bowl with water and neutral

soap.

4.- Put the clean filter, carefully, inside the deposit.

NOTE: Filters usually last 1 year, in case any accident with it,

change it immediately.

Disconnect the appliance from the mains supply if it is not going

to be used for some time.

TECHNICAL SPECIFICATIONS

220-240V ~ 50/60Hz 60W

This device conforms to the safety requirements and provisions of

directives 2006/95/CE on Low tension devices and 2004/108/CE

on Electromagnetic Compatibility.

PROTECTION OF THE ENVIROMENT – DIRECTIVE

2002/96/EC

This product has been designed and manufactured with high

quality materials and components that can be recycled and

reused.

When you see the symbol of a crossed out litter bin on

wheels next to a product, this means that the product

conforms to the European Directive 2002/96/EC.

Please obtain information about the local recycling

system for electric and electronic products.

Follow the local rules and do not dispose of used products by

throwing them in the normal bins at home. Proper recycling

of your used product will help avoid negative impacts on the

environment and people’s health.

E-1918-E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jocca 5893 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jocca 5893 Manual

Product: