509113
21
Zoom out
Zoom in
Previous page
1/23
Next page
- 21 -
18. Fehlersuche
- Problem: Die grüne LED des photoGPS blinkt beim Aufnehmen von GPS Daten/Photos nicht.
- Antwort: Beim Versuch einen Standort zu erfassen, blinken die LED-Anzeigen des photoGPS,
um das Ergebnis der Aufnahme anzuzeigen. In der nachstehenden Tabelle sind die
Bedeutungen dieser Signale angeführt. Jeder Buchstabe zeigt entweder ein rotes (R) oder
grünes (G) Blinksignal an.
LED Signale
Bedeutung Erforderliche Aktion
G Aufnahme erfolgreich Keine
Kein Signal (beim
Aufnehmen eines
Photos)
Entweder ist das Gerät nicht richtig am
Blitzschuh angeschlossen oder es liegt ein
Auslöseproblem vor.
Versuchen Sie das photoGPS vom
Blitzschuh der Kamera zu
entfernen und neu zu
montieren. Sollte das nichts
nützen, gehen Sie weiter zum
Punkt "Das photoGPS löst nicht
aus" weiter unten.
Kein Signal (beim
Drücken der GeoHint
Taste)
Möglicherweise ist die Batterie des photoGPS
fast leer.
Laden Sie das photoGPS über das
USB-Kabel auf.
GR Aufnahme erfolgreich, jedoch geringer Lade-
oder Speicherstatus (<20%)
Wenn Sie denken, dass die
Batterie fast leer ist, laden Sie
das Gerät, indem Sie es mit dem
USB-Kabel an einem Computer
anschließen. Ist der Speicher
des Geräts fast voll, können Sie
die Aufnahmen entweder normal
bearbeiten und löschen, oder die
Aufnahmen zum späteren
Bearbeiten herunterladen.
GRR Aufnahme wegen eines Fehlers abgebrochen Wiederholen. Falls das Problem
weiterhin bestehen bleibt,
kontaktieren Sie bitte Jobo.
GRRRR Speicher voll Bearbeiten und löschen Sie die
Aufnahmen wie üblich oder
laden Sie die Aufnahmen zum
späteren Bearbeiten herunter.
GRRRRRRRR Geräteuhr ist nicht eingestellt Um die Uhrzeit automatisch
einzustellen, verbinden Sie das
Gerät mit einem Computer und
starten die photoGPS
Anwendung (Internetverbindung
ist erforderlich)
RRRR Pause GG Reset / leer gestartet … und fertig gestellt Weiterhin normal verwenden
Rot blinkend Im Gerät ist ein Defekt aufgetreten Wenden Sie sich bitte an Jobo
Problem: Das über den Blitzschuh mit der Kamera verbundene photoGPS wird nicht aktiviert, wenn
ein Photo aufgenommen wird.
Antwort: Damit das photoGPS funktionieren kann, muss es über den mittleren Pin des Blitzschuhs
ein Auslösesignal von der Kamera erhalten. Ist das nicht der Fall, besteht das Problem normalerweise
darin, dass das Gerät nicht richtig auf dem Blitzschuh sitzt. Versuchen Sie das Gerät zu entfernen
und erneut einzusetzen und prüfen Sie, ob das Gerät den Kontakt mit dem mittleren Pin des
Blitzschuhs herstellt. Eine andere Möglichkeit ist, dass das Gerät zwar richtig eingesetzt wurde, aber
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jobo photoGPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jobo photoGPS in the language / languages: German as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jobo photoGPS

Jobo photoGPS User Manual - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info