582547
12
Zoom out
Zoom in
Previous page
1/16
Next page
Changing the bulb
Before you start: Unplug Halowave
and ensure the bulb and lid are cool.
1. Take the lid off Halowave and lay it
down with the metal grill facing up.
2. Locate the round screw hole on
the metal grill (A). Using a magnetic
Pozidriv screwdriver, remove the
screw (B).
3. Grip the grill by the sides, twist anti-
clockwise (C), then lift away (D).
4. The bulb is secured by three clips.
To unclip, push down on the curved
part of the clip with one finger, while
bending back the straight part with
another (E). Be careful of sharp
edges.
5. Once unclipped, carefully push the
curved part back to release (F).
Unplug the bulb by pulling the plastic
plug up and away from the lid (G). Do
not unplug by pulling at the glass.
6. To add the new bulb, first bend down
the plug at a 90 degree angle so that
the pins point downward (H-I).
7. Plug the new bulb into the lid, then
refasten the clips around the bulb.
8. To replace the metal grill: line up the
three hooks on the grill with the three
slots on the lid, ensuring that the
screw hole on the grill will line up with
the hole on the lid. Push down and
then turn clockwise to fit in place (J).
9. Secure the screw back in place
through the screw hole (A).
11
12
A B
E
F
G H
I J
DC
HW_IM_B.indd 12 27/03/2014 13:08
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JML Halowave at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JML Halowave in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info