701312
5
Zoom out
Zoom in
Previous page
1/11
Next page
8 JL Audio
9
“BASS BOOST” CONTROL
The J2-250.1 includes a single band, boost-
only bass equalizer controlled by a rotary knob
marked “Bass Boost. This control has a boost
range of 0dB (full-counterclockwise) to +9dB
(full-clockwise) and is centered at 45 Hz.
LP Filter Frequency (Hz)Input Sens. Bass Boost
Power Protect
Remote
Level Port
LEFT
RIGHT
LEFT
RIGHT
Preamp
Outputs
Amplifier
Inputs
min max 60 240 O +9dB
High-Level Inputs
REMOTE LEVEL CONTROL
The J2-250.1 includes a remote level control
that can be mounted in the front of the vehicle.
This control allows the owner to adjust the overall
subwoofer level to taste. To connect the remote
bass control knob, insert its plug into the jack
labeled “Remote Level Porton the amplifier
and route the cable and control to the desired
location in the front of the vehicle.
LP Filter Frequency (Hz)Input Sens. Bass Boost
Power Protect
Remote
Level Port
LEFT
RIGHT
LEFT
RIGHT
Preamp
Outputs
Amplifier
Inputs
min max 60 240 O +9dB
High-Level Inputs
Care should be taken to securely mount this
control in a manner that does not interfere with
vehicle operation.
When setting the amplifiers input sensitivity,
the Remote Level Control should be unplugged or
at full clockwise rotation (maximum level).
“LP FILTER” CROSSOVER CONTROL
The J2-250.1 employs a 12dB/octave low-pass
(LP) active filter for its internal channel. This
feature is designed to attenuate frequencies above
its filter frequency, so that the systems subwoofers
do not reproduce any audible midrange content.
The low-pass filter in the J2-250.1 is fully
variable between 60 Hz and 240 Hz via the “LP
Filter Frequency control knob. The “10 o’clock
position corresponds to 80 Hz and is a good
starting point for system tuning.
LP Filter Frequency (Hz)Input Sens. Bass Boost
Power Protect
Remote
Level Port
LEFT
RIGHT
LEFT
RIGHT
Preamp
Outputs
Amplifier
Inputs
min max
60 240 O +9dB
High-Level Inputs
“PREAMP OUTPUTS”
The J2-250.1 incorporates a preamp output
section, designed to make multiple amplifier
systems easy to set up. This section consists
of a pair of RCA-type jacks marked
Preamp Outputs”.
LP Filter Frequency (Hz)Input Sens. Bass Boost
Power Protect
Remote
Level Port
LEFT
RIGHT
LEFT
RIGHT
Preamp
Outputs
Amplifier
Inputs
min max 60 240 O +9dB
High-Level Inputs
The Preamp outputs deliver the same signal that
is being fed to the inputs. (If the input signal are
full-range, the preamp outputs will be full-range).
This signal is not affected by the bass boost or LP
FIlter processing selected for the amplifier.
IMPORTANT
!
The signal level of the preamp output is always
low-level regardless of whether you are using
the “High-Level Inputs” or the Low-Level
(RCA-jack) Inputs.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JL Audio J2 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JL Audio J2 250 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info