701353
14
Zoom out
Zoom in
Previous page
1/16
Next page
What follows is a simple method for accurately setting the
input sensitivity (commonly referred to as gain”) of JL Audio
subwoofer amplifiers. You will need the following equipment:
AC Voltmeter (digital display type)
A CD with a sine-wave test tone recorded at
0dB reference level in the frequency range to be
amplified (40-50 Hz works well).
Do not use attenuated test tones
(-10dB, -20dB, etc.).
Step 1: Disconnect the W7(s) from the amplifier
(It is only necessary to disconnect one wire).
Step 2: Turn “Off all processing on the head unit and amplifier
(bass / treble, loudness, EQ, etc.)
Step 3: Switch “Input Voltage” to “Low and turn the
“Input Sensitivity control on the amplifier
all the way down (full counter-clockwise).
Step 4: Verify that you have disconnected the subwoofers from the
amplifier. Then, set the head unit’s volume to 3/4 of full volume.
Step 5: Play a test track with a sine-wave (pure tone)
between 40-50 Hz.
Input Sensitivity Setting Guide
Step 6: Connect the AC voltmeter to the “Subwoofer Output
of the amplifier.
Step 7: Consult Appendix A” in your JL Audio amplifiers
Owners Manual and find the correct target
output voltage for that model and the nominal
impedance of your W7 subwoofer setup.
If you are using another brand of amplifier, we
recommend that you use an oscilloscope to verify the
maximum unclipped output in the vehicle at realistic
vehicle supply voltages.
Step 8: Increase the “Input Sensitivity control (clockwise) until the
listed voltage is delivered. To level-match multiple subwoofer
amps, set each one to the listed voltage. If excessive voltage
is read with the control at minimum (full counter-clockwise),
switch the “Input Voltage” to “High and re-adjust.
Step 9: Reduce the head units volume and turn it off.
Reconnect the subwoofers to the amplifier.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JL Audio 10W7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JL Audio 10W7 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info