509197
10
Zoom out
Zoom in
Previous page
1/12
Next page
JHD910
10
13. Preset Stations
Six numbered preset buttons (13) store and recall stations for each AM and FM band. To store a
station, select a band (if needed), then select a station. Hold a preset button for three seconds. The
current station will be stored, and the corresponding preset number will appear in the display. To
recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to
the corresponding stored station.
Note: Preset buttons recall channels 1-6 on weather band and cannot be set by the user.
Weather Band Operation
14. Accessing the Weather Band
Press WB (14) to directly access the weather band mode from any other function mode.
What is the NOAA Weather Radio?
This is a nationwide system that broadcasts local weather emergency information 24 hours a day. The U.S.
network has more than 530 stations covering the 50 states as well as the adjacent costal waters, Puerto
Rico, the U.S. Virgin Islands and the U.S. Pacific Territories. Each local area has its own transmitting station
and there are a total of seven broadcasting frequencies used: 162.400MHz (CH1), 162.425MHz (CH2),
162.450MHz (CH3), 162.475MHz (CH4), 162.500MHz (CH5), 162.525MHz (CH6) and 162.550MHz (CH7).
How many stations can I expect to receive?
Since the broadcasts are local weather and information, the transmission power is usually very low (much
less than AM or FM stations) so you will usually receive only one station unless you are on the edge of two
or more broadcast signals. The most you will receive will be two or three, and that is rare.
Is it possible I won't receive any stations?
Depending on location, it’s possible you will receive a very weak signal or none at all. Also, similar to AM and
FM signals, weather band signals are subject to surrounding conditions, weather, obstructions of the signal
by hills or mountains, etc. If no NOAA signals are found/received, the “NO SIG” icon will flash in the display
and the tuner will scan all seven NOAA frequencies every 30 seconds.
How will I know I am tuned to the weather band?
When you select the weather band, the “WB” icon will appear on the display panel, along with the current
channel indication. Press TUN+ or TUN- to tune to each of the seven channels until you find the weather
band station broadcasting in your area.
NOAA Weather Alert
The Weather Alert function adds an additional level of user safety by automatically switching from the
current function mode to weather band mode for a minimum of 60 seconds if a NOAA warning tone (1050
Hz) is received/detected. If no additional warning tone is received for 60 seconds, the unit will switch back to
the last known function mode.
The Weather Alert function can be turned “on” or “off” by the Audio/Menu key, as described on page three.
When “ON” (default), the Weather Alert icon appears in the display and the weather tuner remains active,
even when the radio is turned off (as long as the power is still applied to the radio). If a weather alert is
issued, the radio will turn on and play the announcement. for 60 seconds, then turn back off and revert to
weather alert monitor mode.
If the Weather Alert function is set to “OFF”, no Weather Alert icon appears in the display. The radio will not
respond to any weather alerts when it is off and will not automatically switch to the weather band if an alert is
issued.
Note: If the unit is programmed for European operation, the WB function will be disabled.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen JHD910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen JHD910 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info