Manual JBSystems MCD200 (page 3 of 43) (English, German, Dutch, French, Portuguese, Spanish)

468050

Zoom out

Zoom in

1/43

ENGLISH USER MANUAL

JB SYSTEMS® 1/81 MCD200

OPERATION MANUAL

Thank you for buying this JB Systems

product. To take full advantage of all possibilities,

please read these operating instructions very carefully.

FEATURES

 Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)

o MPEG1 layer3 (32 + 44,1 + 48kHz)

o MPEG2 layer3 (16 + 22,05 + 24kHz)

o MPEG2.5 layer3 (8 + 11,025 + 12kHz)

 Supports both CBR and VBR bitrate modes.

 Up to ID3v2 tag support

 Reads CD-DA, CD-R, CD-RW

 Anti-shock Memory 10seconds

 1/75sec Frame search, also on MP3

 Digital scratch effect via jog wheel

 4 Hot Cue buttons can hold cue points and loops!

 Permanent memory for up to 2048 (512 x 4) Cue points and loops

 Seamless real-time loop edit function!

 Full automatic BPM counter

 Pitch Lock (Master Tempo)

 Pitch ranges: +/-4% +/-8% +/-16% +/-100% (up to +/-16% on MP3)

 Pitch bend on jog wheel and buttons for perfect mixes

 Adjustable pitch bend parameter for ultra precise pitch bending (software V22 and up)

 Up to 4 Seamless loops for every track with reloop/stutter

 Real-time cue (“Cue on the fly”)

 Ultra fast memory start within 10msec

 Fader start, fader stop, (back cue),

 Auto cue function(-48dB)

 4 different speed scan

 Alphanumeric LCD display (for CD-TEXT and MP3 ID3v2 tags)

 Selectable elapsed, remain and total remain time display

 Jog wheel with special rubber surface

 Single/continuous play

 Relay play allows consecutive playback on two decks

 S/PDIF digital audio RCA coaxial

 60 seconds Transport Protection

 Sleep mode (saves the life span of the laser)

BEFORE USE

Check the contents:

Check that the carton contains the following items:

 MCD200 unit

 User manual

 1 Mains cable

ENGLISH USER MANUAL

JB SYSTEMS® 2/81 MCD200

 1 cinch/cinch cable

 1 mono mini-jack cable for fader start and relay play

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do

not remove the top cover. No user-serviceable parts

inside. Refer servicing to qualified service personnel

only.

The lightning flash with arrowhead symbol within the equilateral triangle is

intended to alert the use or the presence of un-insulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute a

risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to

the presence of important operation and maintenance (servicing) instructions in

the literature accompanying this appliance.

This symbol means: indoor use only.

This symbol means: Read instructions.

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding

temperatures when bringing it into a warm room after transport. Condense sometimes

prevents the unit from working at full performance or may even cause damages.

 This unit is for indoor use only.

 Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such

as vases, shall be placed on this appliance. Electric shock or malfunction may result. If a

foreign object enters the unit, immediately disconnect the mains power.

 No naked flame sources, such as lighted candles, should be placed on the appliance.

 Don’t cover any ventilation openings as this may result in overheating.

 Prevent use in dusty environments and clean the unit regularly.

 Keep the unit away from children.

 Inexperienced persons should not operate this device.

 Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient

temperatures.

 Always unplug the unit when it is not used for a longer time or before you start servicing.

 The electrical installation should be carried out by qualified personal only, according to

the regulations for electrical and mechanical safety in your country.

 Check that the available voltage is not higher than the one stated on the rear panel of the

unit.

 The socket inlet shall remain operable for disconnection from the mains.

 The power cord should always be in perfect condition: switch the unit immediately off

when the power cord is squashed or damaged.

 Never let the power-cord come into contact with other cables!

 When the power switch is in OFF position, this unit is not completely disconnected from

the mains!

 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there

are no user serviceable parts inside.



Never

repair a fuse or bypass the fuse holder.

Always

replace a damaged fuse with a

fuse of the same type and electrical specifications!

CAUTION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBSystems MCD200 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBSystems MCD200 Manual

Product: