640941
3
Zoom out
Zoom in
Previous page
1/15
Next page
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
1/25 LED ROPE LIGHT
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own safety, please
read these operating instructions very carefully before you start using this unit.
FEATURES
This product meets the requirements of the current European and national guidelines. Conformity has been established
and the relevant statements anddocuments have been deposited by the manufacturer.
This device has been designed to produce decorative effect lightingand is used in light show systems.
RGB Multicolor flexible rope light (round, D=14mm) with super bright LEDs inside.
Perfect for indoor and outdoor multicolor façade decoration of bars, discotheques, shops, …
Can be bended to follow the shape of walls and corners.
Solid 4pin connectors with security lock.
To be used with our LED-MANAGER (dmx power supply)
Comes in 30 m lengths that can be cut every 50cm.
Low power consumption: 2 Watt/meter
Power cables, middle connectors, end caps and mounting clips separately available.
Importantremark : The led rope does only work in cooperation with a separate device, the LED MANAGER (to control
the rope light by DMX). It’s impossible to use the led rope light separately.
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the
device and consult your dealer first.
Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to
strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not
subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check thecontents:
Check that the carton contains the following items:
Operating instructions
30m Led rope light
INSTALLING THE LED ROPE LIGHT AND ACCESSORIES
SOME IMPORTANT REMARKS:
With all LEDs switched on, this rope light consumes about 2 Watts/meter. This means you can connect up to 150m on
1 LED MANAGER (75m on each output: 2x 75m = 150m)
The rope light can be cut every 50cm (cutting marks available)
This product can be used in indoor and outdoor situations, the maximum ambient temperature is 45°C.
!! This LED RGBrope light can only be used together with the JB SYSTEMS
®
LED MANAGER !!
!!! DON’T CONNECT DIRECTLY TO230 Vac !!!
Don’t use lengths over 30m, the internal conductors will be overloaded which will damage the rope light!! (
more info below )
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
2/25 LED ROPE LIGHT
SOME ACCESSORIES EXPLAINED:
POWER CABLE: this power cable is used to connect the rope light to the LED MANAGER. This can be done by
simplyconnecting the conductors of the power cable with the colored conductors of the cables delivered with the LED
MANAGER.
MIDDLECONNECTOR:
Used to link 2 pieces of LED RGB rope light together.
ENDCAP: Used to seal the end of a rope light.
MOUNTING TRACKS (2m): Used to guide the rope light when it is installed on a flat surface. You will be come a
nicely aligned straight rope light.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBSystems Led Rope Light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBSystems Led Rope Light in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info