810178
3
Zoom out
Zoom in
Previous page
1/8
Next page
INCLUDED ITEMS
2. Screw the soundbar’s right speaker section onto the portion of the threaded rod
that is protruding from the left speaker. When the speaker is threaded all the way
onto the rod and tightened securely the fronts of both speakers should be properly
aligned.
3. Attach the bottom bridge plate tothe two speakers, using the small
hex wrench and 4 of the bridge plate screws.
4. Connect the umbilical cables between the two speakers.
6. Attach the rear bridge plate to the two speakers, using the small hex wrench and
the remaining 4 bridgeplatescrews.
5. Before attaching the rear bridge plate, you will need to set the Input Level switch,
Auto Turn-On switch and Gain control:
a. If you will be connecting the soundbar’s audio inputs to the pre-outs of a car
stereo head unit or other line-level source, set the Input Level switch in the
“Lo” position. If you will be connecting the soundbar to the speaker-level
outputs of a car stereo head unit, set the Input Level switch in the “Hi”
position.
b. If you set the Input Level switch to “Hi” and want the soundbar to
automatically turn on when it receives an audio signal, set the Auto Turn-On
switch in the “On” position. If not, set the switch in the “Off” position. (The
Auto turn-On switch has no effect if the Input Level switch is set to “Lo.”)
c. Set the Gain control at the 12 o’clock position. You can fine-tune this control
to maximize the soundbar’s performance once you have completed the
installation andcan playmusic throughthe soundbar.
MOUNTING
1a. Insert the 2 mounting bracket base assemblies into the 2 mounting track openings
onthebottomofthesoundbar.
1b. Slide the mounting bracket bases inside the tracks all the way around to the top of
the soundbar.
AUTO TURN ON
INPUT LEVEL
GAIN
MIN
OFF ON
MAX
FUSE
20A
UPGRADE
LO HI
Input Level
Switch
Gain
Control
Auto Turn-On
Switch
x2
a. b.
ASSEMBLY
1. Hand-tighten the threaded rod into the soundbar’s left speaker section (with the
cable attached). Apply the supplied EVA gasket to the end panel of one of the
speakers before assembling the Soundbar.
STADIUM UB4100 AMPLIFIED POWERSPORTS SOUNDBAR
Page1
“JBL STADIUM UB4100 Subwoofer output works with optional JBL MPS1000.”
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL STADIUM UB4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL STADIUM UB4100 in the language / languages: English as an attachment in your email.

The manual is 3.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info