493450
3
Zoom out
Zoom in
Previous page
1/4
Next page
3
www.jbl.com
Power button: When the OnBeat Venue is on, press the Power button to put it into the
standby mode. The button’s LED will illuminate solid amber when the unit is in standby.
When the OnBeat Venue is in standby, press the Power button to turn it on. The button’s
LED will illuminate solid white when the unit is on.
When the OnBeat Venue is in the standby mode it will automatically turn on when it detects
audio playing from a Bluetooth-connected device or from a docked device.
When the OnBeat Venue is on, it will automatically enter the standby mode after 10 minutes
of inactivity (no audio input and no user-control operation).
Note: When the OnBeat Venue enters the standby mode it will also bring a docked device
into standby mode.
Volume Up/Down buttons: Press these buttons to raise and lower the OnBeat Venue’s
volume. To mute the sound, press both buttons at the same time. (The Power button LED
will flash white when the sound is muted.) To restore the sound press both Volume buttons
together.
Docking slide: Press in on the JBL logo to open the docking slide and pull the slide all
the way open.
Docking connector: Place your device onto the docking slide so that it is firmly seated
on the docking connector.
Note: We recommend that you disable the”Shake to Shuffle” feature on your iPod nano,
iPod touch and iPhone before docking the device on the OnBeat Venue.
BLUETOOTH WIReLeSS StReamInG
To wirelessly stream audio to the OnBeat Venue from a Bluetooth-enabled device:
1. If the OnBeat Venue’s Bluetooth LED is not flashing blue, press the Source button until
the Bluetooth LED begins flashing blue.
2. Place the Bluetooth-capable device in the pairing mode. Use the device’s Bluetooth
pairing menu to pair with OnBeat Venue. (If the device requires a pairing code, use
0000.)
3. When OnBeat Venue’s Bluetooth LED illuminates blue continually, it is paired with the
device and you can stream audio via Bluetooth from the device to the OnBeat Venue.
To disconnect the Bluetooth device, press and hold the Source button. To pair OnBeat
Venue with a different Bluetooth-enabled device, repeat Steps 2 and 3 with the new device.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL OnBeat VenUe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL OnBeat VenUe in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL OnBeat VenUe

JBL OnBeat VenUe User Manual - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info