689262
11
Zoom out
Zoom in
Previous page
1/13
Next page
www.jbl.com
English
11
11 SPECIFICATIONS
Audio/ video
Maximum Power: 100 W
Frequency Response: 75 Hz - 20 KHz
HDMI Video Input: 3 (support 4K UHD, HDMI 2.0)
HDMI Video Output (With Audio Return Channel): 1 (Support
4K UHD, HDMI 2.0
HDCP Version: 2.2 and 1.4
Bluetooth
Bluetooth Version: 4.2
Bluetooth Transmitter Frequency Range: 2402 - 2480 MHz
Bluetooth Transmitter Power: 9 dBm
Bluetooth Transmitter Modulation: GFSK, π/4 DQPSK
Wi-Fi
2.4G Wi-Fi Transmitter Frequency Range: 2412 - 2472 MHz
(2.4 GHI ISM BAND)
2.4G Wi-Fi Transmitter Power: <20dBm
2.4G Wi-Fi Modulation: DBPSK, BPSK, CCK, QPSK, BPSK,
16 QAM
5G Wi-Fi Transmitter Frequency Range: 5.15 - 5.35GHz,
5.470 - 5.725GHz, 5.725 - 5.825GHz
5G Wi-Fi Transmitter Power: <20 dBm
5G Wi-Fi Modulation: QPSK, BPSK, 16QAM, 64QAM,
256QAM
5.8G Wireless Transmitter Frequency Range:
5740 - 5840MHz
5.8G Wireless Transmitter Power: < 8 dBm
5.8G Wireless Transmitter Modulation: GFSK
General
Power Supply: 100-240V~50/60Hz
Transducer: 2 x 20mm (0.8”) tweeter, 4 x 44 x 80mm
racetrack driver
Ethernet: 10/100Mbps
Dimension (W x H x D): 1020 x 60 x 93mm
Net Weight: 2.5kg
Gross Weight: 4.4kg
12 TROUBLESHOOTING
Never try to repair the product yourself. If you have any problems
using this product, check the following points before you request
service.
How can I reset the LINK BAR?
You can reset the LINK BAR via the settings menu. Select
Device Preference -> Reset.
What are the sound modes on the LINK BAR?
There are 4 sound modes, you can select in the settings
menu: Sound -> EQ mode:
a. Standard
b. Movie
c. Music
d. Voice
“Standard” sound mode is the default settings.
Will my LINK BAR enter low power-mode automatically?
You can set the standby in the settings menu
No sound from the LINK BAR:
Make sure that the LINK BAR is not muted.
Make sure to select the correct audio input source.
No sound from the wireless subwoofer:
Check if the subwoofer LED is in solid white color. Blinking
LED means a disconnection. Manually pair the subwoofer
with the LINK BAR.
Distorted sound or echo:
If you play audio from the TV through the LINK BAR, make
sure the TV speaker is disable or muted.
A device cannot connect with the LINK BAR.
Check if you enable the Bluetooth function of the device.
The LINK BAR is already connected to another Bluetooth
device. Press and hold on the remote control to disconnect
and pair with a new device.
Poor audio quality from a connected Bluetooth device:
The Bluetooth reception is poor. Move the device closer to
the LINK BAR, or remove any obstacles between the device
and the LINK BAR.
No response to the voice command:
Depending on the location of your LINK BAR, the ambient
conditions may prevent the speaker from detecting the voice
command “Hey Google” or “OK Google”.
Try using the remote control, press the Google Assistant
button ( ) and speak to the mic on the remote control.
Make sure the Privacyswitch is off, and the microphones are
not muted.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL LINK BAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL LINK BAR in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL LINK BAR

JBL LINK BAR Quick start guide - English - 2 pages

JBL LINK BAR User Manual - German - 13 pages

JBL LINK BAR User Manual - Dutch - 13 pages

JBL LINK BAR Quick start guide - French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info