• If you have connected the amplifier to a pair of 6" or smaller full-range speakers, set the Crossover Filter switch in the “HP” (high-pass) position.
This will limit the amount of low-frequency energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage.
• If you have connected the amplifier to a pair of large full-range speakers (6" x 9" or larger) that can handle significant bassand you are not using a
subwoofer in the system, set the Crossover Filter switch to the "FLAT' (full-range) position.
• If you have connected the amplifier to a pair of woofers or subwoofers, set the Crossover Filter switch in the “LP” (low-pass) position. This will limit
the amount of high-frequency energy sent to the woofers/subwoofers, improving the clarity of vocals and other midrange sounds.
GX-A602: BRIDGED OPERATION
Crossover Filter switch: When operating the amplifier in bridged mode into a subwoofer, set the Crossover Filter switch in the “LP” (low-pass)
position. This will limit the amount of high-frequency energy sent to the subwoofer.
GX-A3001
NOTE: The GX-A3001's internal crossover is permanently set for low-pass operation.
Crossover control: The Crossover control limits the amount of high-frequency energy sent to the woofers or subwoofer.
The Crossover control setting you use for subwoofers will depend on the type and location of your system’s subwoofer.
Start by setting the Crossover control to a frequency somewhat lower than the high-pass crossover setting you used for the
system's other speakers. After listening to music on the system for a time, fine-tune the Crossover control setting to achieve
a smooth transition from the subwoofer to the rest of the system’s speakers while avoiding a “hole,” where the sounds that
occur between the subwoofer and other speakers seem to drop out. The illustration to the right shows the recommended
Crossover control frequency range.
SET THE INPUT LEVEL
1. Turn all the Level controls on all amplifiers fully counter-clockwise.
2. Play some dynamic music through your source unit and turn its volume up to 3/4 volume.
3. Slowly turn the Level control on the front-channel amplifier clockwise until the music begins to sound distorted.
4. Turn the Level control counter-clockwise slightly until the music no longer sounds distorted.
5. If you're using more than one amplifier or are using the GX-A604, repeat Steps 3 – 4 for all remaining amplifier Level controls.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for JBL GX-A604 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of JBL GX-A604 in the language / languages: English as an attachment in your email.
The manual is 1,86 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
