809553
5
Zoom out
Zoom in
Previous page
1/6
Next page
Troubleshooting
three. Operation
min max
Volume
min max
Volume
Mode Procedure LED Status
Off Receiver/amplifier off Red
On Receiver/amplifier on and playing program material Green
Standby Simply turn off your receiver/amplifier. The subwoofer will Red
turn off after approximately five minutes. The subwoofer
will turn on when your receiver/amplifier begins playing again.
Volume
Crossover Frequency
The crossover-frequency knob
determines the highest fre-
quency your subwoofer will
reproduce. It allows a seam-
less transition from the
subwoofer to the satellite
speakers. Experiment with
this adjustment to find the
crossover frequency that
sounds best with your
speakers.
When the control is at the
50 position, very few high
frequencies will be heard.
This position is best suited
to large main speakers. For
most users, the control should
be set somewhere near the
mid position. For listeners
using very small speakers,
best results will be obtained
with the control at the 150
position.
If you used the high-level
(SPKR) inputs and there is
no sound from any of the
speakers, check the
following:
Receiver/amplifier is on
and a source is playing.
Powered subwoofer is
plugged in.
Check all wires and connec-
tions between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the
speaker wires are frayed,
cut or punctured.
Review proper operation
of your receiver/amplifier.
If there is low bass output,
check the following:
Make sure the connections
to the left and right Speaker
Inputs have the correct
polarity (+ and ).
Make sure that the sub-
woofer is plugged into an
active electrical outlet.
Powered subwoofer is
plugged in.
Adjust the crossover point.
If you used the line-level
inputs and there is no
sound from the subwoofer,
check the following:
Receiver/amplifier is on
and a source is playing.
Powered subwoofer is
plugged in.
Check all wires and con-
nections between receiver/
amplifier and subwoofer.
Make sure all wires are con-
nected. Make sure none of
the wires are frayed, cut or
punctured.
Review proper operation of
your receiver/amplifier.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Decade DS-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Decade DS-10 in the language / languages: English as an attachment in your email.

The manual is 0.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info