227449
5
Zoom out
Zoom in
Previous page
1/6
Next page
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision: A
Page
5
of
6
Harman Multimedia Confidential
Troubleshooting
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
NOTE
No power to unit. Make sure wall power
outlet or power strip has
power. Make sure all
switches for outlet/power
strip are on and that all
switches for speaker
system are on.
Check green power LED on
the sub. Are the LED’s on?
If the sub’s led is not on,
power is not getting to your
speaker system. Try the
solutions shown.
No sound from Speakers
Is the control/right satellite of
your Creature plugged in
correctly?
Ensure that the control
speaker connector is
pushed in properly.
Remove the control /right
speaker connector from
the subwoofer, then re-
connect this cable
ensuring that the
connector is pushed in
properly.
There is an LED located in
the bottom of each of the
two satellite speakers.
These should both be lit. If
they are, your speakers are
both plugged in correctly.
Noise may be caused by
interference from the
monitor.
Turn monitor off to see if
noise is eliminated. Move
speaker cables farther
away from monitor.
Speaker is being overdriven
by an amplified audio
source.
Ensure that speaker is
connected to the
appropriate receptacle.
Check color-coding on
connectors when making
connections. Make sure
that all signal cables are
inserted snugly into
receptacles.
Volume level on sound card
may be too high.
Check volume of sound
card via Windows Volume
Control.
Sound card or audio source
material may be cause of
problem.
Check speakers with
another audio source.
Disconnect speaker input
cable (green connector)
from sound card and plug
into CD ROM headphone
jack. If static is eliminated,
troubleshoot the soundcard.
Distortion (static, crackling
or hissing sounds)
Check the speaker control
settings.
Set each of the two knobs
(treble, bass level) on front
of the subwoofer back the
their center /nominal
positions.
Too much bass or treble. Bass/Treble level is set too
high
Turn Bass/Treble down or
return their settings to the
center position.
Subwoofer emits a loud
hum or buzzing noise.
Input cables not plugged in
properly
Check input cable
connection
Wrap up excess input
cable in order to make as
short as possible
Speaker system
experiences radio
frequency interference or
picks up a radio station
Input cable may be picking
up interference
Purchase a ferrite clamp
and attach over input
cable. A clamp can be
purchased at your local
electronics store
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL creature ii speakers subwoofer blauw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL creature ii speakers subwoofer blauw in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info