648478
4
Zoom out
Zoom in
Previous page
1/72
Next page
4
WALL-MOUNTING THE SPEAKERS USING THIRD-PARTY
WALL BRACKETS
Each JBL Control X speaker contains a 3/8"-16 threaded insert on the
back to facilitate the use of third-party wall brackets. Please consult
your JBL dealer or distributor for recommendations.
Note: Customer is responsible for proper selection and installation of
appropriate third-party wall brackets.
DISTANCE BETWEEN EACH SPEAKER
For optimal stereo imaging, 6–8 feet (1.8m – 2.4m) is recommended
between each speaker. If you require a wider space or distance, be
sure to run a L + R (summed mono) signal from your amplifier or
receiver to each speaker if your equipment offers this option.
MAINTENANCE AND SERVICE
The speaker enclosures may be cleaned using a soft cloth to remove
fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade periodi-
cally. The frequency of maintenance depends on the metals involved in
the connections, atmospheric conditions and other factors, but once per year
is the minimum.
In the event that your system ever needs service, contact your
local JBL
dealer or distributor, or visit www.jbl.com
for a service center near you.
SPECIFICATIONS
Low Frequency Transducer:
5.25" (133mm) polypropylene
graphite-filled cone
High Frequency Transducer:
1" (25mm) CMMD
®
Lite dome / High
Definition Imaging Waveguide
Recommended Amp Power: 20 – 100 Watts
Frequency Response (-3dB): 90Hz – 20kHz (anechoic)
Sensitivity: (2.83V@1m) 87dB
Nominal Impedance: 8 Ohm
Crossover Frequencies: 2300Hz – 12dB/octave
Inputs: Gold-plated 5-way binding posts
Dimensions (H x W x D):
9-1/4" x 6-1/2" x 6-1/4"
(235mm x 165mm x 158.8mm)
Weight: 5.8 lbs (2.63 kg)
Features, specifications and appearance are subject to change without notice.
*The recommended amplifier power rating will ensure proper system headroom to
allow for occasional peaks. We do not recommend sustained operation at the maximum
power level.
© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
HARMAN International Industries, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
TR00498_B
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CONTROL X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CONTROL X in the language / languages: All languages as an attachment in your email.

The manual is 6,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info