810138
3
Zoom out
Zoom in
Previous page
1/4
Next page
If there is no sound from your speakers:
Make sure your power amplifier is on and the gain is set above its minimum setting.
Make sure there is a signal to your amplifier from your mixer.
Ensure all wires are connected and that none are cut or frayed.
If more than one pair of speakers is being used, check the minimum impedance
requirments of your amplifier (overloading your amplifier can result in damage to
your amp).
If there is no sound from one of your speakers:
Check the balance control on your mixer.
Check the channel output gains of your amplifier.
Ensure all wires are connected and that none are cut or frayed.
If there is no (or weak) bass output or a poor stereo image:
Make sure the polarities (+ and -) of the speakers inputs are properly connected.
C) Mount the wall bracket plate (4) onto a flat sturdy surface using the
appropriate mounting hardware for the surface. A safety cable (5) (not
included) may be attached to the wall bracket via its eyelet (6) at one of the
two lower screw mounting points or to a secondary point off the mounting plate.
D) Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly (1).
E) Holding the cabinet (8) with both hands, insert the ball on the metal rod/ball
assembly (1) into the cup of the wall plate (4).
F) Orient the speaker into the desired position and hand tighten the molded nut
(7). Once the orientation is finalized, use the metal bar (9) in one of the holes
on the molded nut (7) to securely tighten.
G) Finally, clip the safety cable to the cabinet’s safety bar (10) on the back of the
cabinet.
The Control 1 Pros logo can be oriented for display at 9increments. To rotate the
logo, first gently pry the grille and gasket from the cabinet. Next, push-in the logos
fastener (found on the underside of the grille) and rotate the logo to the desired
position.
Rotating the Logo
Troubleshooting
JBL Professional 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Control 1 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Control 1 Pro in the language / languages: English as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info