633325
11
Zoom out
Zoom in
Previous page
1/13
Next page
ESPAÑOL MANUAL DE INSTRUCCIONES
JB SYSTEMS
®
17/21 EQ215 & BEQ15
FUNCIONES (PANEL FRONTAL)
1. Deslizantes de corrección: Estos deslizantes permiten corregir el nivel sonoro de cada
banda de frecuencias. Es importante mantener una linea de corrección alrededor de « 0 ».
2. EQ ON: Este interruptor activa las correcciones efectuadas con los deslizantes. El interruptor
desactivado, la señal de salída corresponde a la señal de entrada sin ninguna corrección.
3. Peak Led: Este Led se enciende si la señal es damasiado elevada. En ese caso, disminuír las
correcciones de manera linear.
4. 6/12 dB Range: Este interruptor permite seleccionar una gama de corrección de ± 6dB o ± 12dB.
Seleccionar ± 12dB permite efectuar correcciones más importantes.
5. Low Cut: Activación de un filtro que corta las frecuencias subsonicas (< 20 Hz).
6. Level: Ajusta el nivel de la señal de entrada.
7. Interruptor ON/OFF
FUNCIONES (PARTE TRASERA)
8. Cable de alimentación 230V
9. Ground Lift (Puesta a tierra):
Float: esta posición mejora el sonido y suprime los parasitos y ruidos indeseables (evita « bucles » de
tierra).
Ground: en esta posición, pueden ocurrir ruidos indeseables.
10. Entrada asimétrica Cinch
11. Salída asimétrica Cinch
12. Salída simétrica Jack estéreo 6,3 mm:
Funda = Masa, Anillo = Negativo, Punta = Positivo
En caso de conexión asimétrica, el anillo del jack debe quedar libre.
13. Salída simétrica XLR
Pin 1 = Masa, Pin 2 = Positivo, Pin 3 = Negativo
En caso de conexión asimétrica, el Pin 3 del XLR debe quedar libre. Pin 1 = masa ; Pin 2 = señal.
14. Entrada simétrica Jack estéreo 6,3 mm
Funda = Masa, Anillo = Negativo, Punta = Positivo
En caso de conexión asimétrica, puentear el anillo con la funda.
15. Entrada simétrica XLR
Pin 1 = Masa, Pin 2 = Positivo , Pin 3 = Negativo
En caso de conexión asimétrica, puentear el Pin 3 con el 1 (masa).
ESPAÑOL MANUAL DE INSTRUCCIONES
JB SYSTEMS
®
18/21 EQ215 & BEQ15
CARACTERISTICAS TECNICAS
Alimentación: AC 230 V, 50Hz
Respuesta de frecuencia: 10-20.000Hz (+/-2dB)
Control de tonalidad: 25/40/63/100/160/250/400/630Hz
1/1.6/2.5/4/6.3/10/16 KHz
Rango de control: Conmutable +/- 6dB o +/- 12dB
Low Cut Filter: 20Hz / -12dB
DHT + ruido: <0.1% @ 1kHz, 0dB
S/N Ratio (IHF-A): >66dB @ 1kHz.
Entradas: 775mV @ 50kΩ
Salidas: 775mV @ 600Ω
Dimensiones: 482(W) x 44,5(H) x 165(D) mm
Peso: 2,5kg
Toda la información está sujeta a cambios sin previo aviso
Puede descargar la última versión de este manual de usuario en nuestro sitio web: www.beglec.com
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems EQ215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems EQ215 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info