497793
48
Zoom out
Zoom in
Previous page
1/49
Next page
DEUTSCH BEDIENUNGSANLEITUNG
JB SYSTEMS
®
91/93 CMX24
MIDI Funktion:
MIDI IN Kanal einstellen: Drücken Sie die Flash Taste 1 3X und halten Sie dabei die Record
Taste gedrückt. Auf dem Display wird “CHI” erscheinen. Drücken Sie auf eine der Flash-Tasten
von 1-16 um das MIDI IN an einen der Kanäle anzukoppeln. Wenn die LED über diesem Kanal
brennt, ist der Kanal gut eingestellt. Drücken Sie anschließend die Record Taste wieder + die
Record Exit Taste um das MIDI Setup zu verlassen.
MIDI OUT Kanal einstellen: Drücken Sie die Flash Taste 2 3X und halten Sie dabei die
Record Taste gedrückt. Auf dem Display wird “CHO” erscheinen. Drücken Sie auf eine der
Flash-Tasten von 1-16 um das MIDI OUT an einen der Kanäle anzukoppeln. Wenn die LED über
diesem Kanal brennt, ist der Kanal gut eingestellt. Drücken Sie anschließend die Record Taste
wieder + die Record Exit Taste um das MIDI Setup zu verlassen.
MIDI File Dump empfangen: Drücken Sie die Taste 3 3X und halten Sie dabei die Record
Taste gedrückt. Auf dem Display wird “IN” erscheinen, was anzeigt, dass das Gerät bereit ist,
den File Dump zu empfangen.
MIDI File Dump verschicken: Drücken Sie die Flash Taste 4 3X und halten Sie dabei die
Record Taste gedrückt. Auf dem Display wird “OUT” erscheinen, was anzeigt, dass das Gerät
bereit ist, den File Dump zu verschicken.
WICHTIG:
o Während eines File Dump wird keine andere Funktion des CMX24 arbeiten. Wenn dieser
File Dump abgeschlossen ist, werden Sie die anderen Funktionen wieder benutzen können.
ARBEITSSCHEMA (FÜR WEITERE INFOS SIEHE
VORANGEHENDES KAPITEL)
Geschützten Modus aktivieren
<RECORD/SHIFT> + <KILL/REC EXIT> bis die Leuchte über der Record Taste ausgeht.
In diesem Modus können keine Chases/Scenen programmiert oder geändert werden.
Programmier-Modus aktivieren
Halten Sie die <RECORD/SHIFT> Tastegedrückt
Drücken Sie kurz die <PRESET A 1> Taste
Drücken Sie kurz die <PRESET A 5> Taste
Drücken Sie kurz die <PRESET A 6> Taste
Drücken Sie kurz die <PRESET A 8> Taste
Lassen Sie die <RECORD/SHIFT> Taste los
Edit-Modus aktivieren
<EDIT/ALL REV> + <PRESET B x>
!!Funktioniert nur, wenn der Programmier-Modus eingeschaltet ist.
DEUTSCH BEDIENUNGSANLEITUNG
JB SYSTEMS
®
92/93 CMX24
Steuerung leeren
!! Folgendes Verfahren löscht den gesamten Speicher!!
DerProgrammier-Modus muss eingeschaltet sein!!
Halten Sie die <RECORD/SHIFT> Tastegedrückt
Drücken Sie kurz die <PRESET A 1> Taste
Drücken Sie kurz die <PRESET A 3> Taste
Drücken Sie kurz die <PRESET A 2> Taste
Drücken Sie kurz die <PRESET A 3> Taste
Lassen Sie die <RECORD/SHIFT> Taste los
Arbeitsspeicher leeren
<RECORD/SHIFT> + <RECCLEAR>
Scenespeichern
Programmier-Modus aktiv
<RECORD/SHIFT> + <PAGE/REC CLEAR> Arbeitsspeicher leer
<RECORD/SHIFT> Lichtbild inArbeitsspeicher speichern
<PAGE/RECCLEAR> Seite wählen
<RECORD/SHIFT> + <PRESET B x> Arbeitsspeicher in Preset B
Sceneändern
Programmier-Modus aktiv
<PAGE/RECCLEAR> Seite wählen
<EDIT/ALL REV> + <PRESET B x> Edit Modus aktivieren
<UP/CHASE REV> + <PRESET A/B x> Intensität erhöhen
<DOWN/BEAT REV> + <PRESET A/B x> Intensität verringern
<RECORD/SHIFT> + <PAGE/REC CLEAR> Edit Modus verlassen
Chasespeichern
Programmier-Modus aktiv
<RECORD/SHIFT> + <PAGE/REC CLEAR> Arbeitsspeicher leer
<RECORD/SHIFT> Lichtbild in Arbeitsspeicher speichern für
jedes Lichtbild wiederholen
<PAGE/RECCLEAR> Seite wählen
<RECORD/SHIFT> + <PRESET B x> Arbeitsspeicher in Preset B
ChaseLichtbilderändern
Programmier-Modus aktiv:
<PAGE/RECCLEAR> Seite wählen
<EDIT/ALL REV> + <PRESET B x> Edit Modus aktivieren
<STEP> Lichtbildwählen
<UP/CHASE REV> + <PRESET A/B x> Intensität erhöhen
<DOWN/BEAT REV> + <PRESET A/B x> Intensität verringern
<RECORD/SHIFT> + <PAGE/REC CLEAR> Edit Modus verlassen
ChaseLichtbildhinzufügen
Programmier-Modus aktiv
<RECORD/SHIFT> + <PAGE/REC CLEAR> Arbeitsspeicher leer
<RECORD/SHIFT> Lichtbild inArbeitsspeicher speichern
<PAGE/RECCLEAR> Seite wählen
<EDIT/ALL REV> + <PRESET B x> Edit Modus aktivieren
<STEP> Lichtbild wählen VOR DEM das neue
Lichtbild kommen soll
<INSERT/% or 0-255> Lichtbildhinzufügen
<RECORD/SHIFT> + <PAGE/REC CLEAR> Edit Modus verlassen
ChaseLichtbildschen
Programmier-Modus aktiv
<PAGE/RECCLEAR> Seite wählen
<EDIT/ALL REV> + <PRESET B x> Edit Modus aktivieren
<STEP> Lichtbildwählen
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems CMX-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems CMX-24 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info