756977
5
Zoom out
Zoom in
Previous page
1/8
Next page
ENGLISH OPERATION MANUAL
JB SYSTEMS 3/5 BATTLE4-usb
CONTROLS AND FUNCTIONS
1. [DJ MIC] XLR INPUT: Accepts a balanced microphone with XLR connector. This input is mainly used for
the DJ-microphone.
2. [HIGH] tone control: Controls the high frequency of the DJ mic
3. [LOW] tone control: Controls the low frequency of the DJ mic.
4. [DJ MIC LEVEL]: Used to adjust the level of the DJ mic.
5. [MIC] switch:
[OFF]: the microphone channel is switched off
[ON AIR]: mic switched on
6. [CF SLOPE] switch: is used to set the crossfader curve to
[FLAT]: for a longer smooth fading curve
[STP]: for a fast steep fading curve (mostly used for scratching)
7. [X-MASETER-Y] routing selector: use this switch on each chanel to send your signal :
[X] = to the X channel of your crossfader,
[Y] = to the Y channel of your crossfader
[MASTER] = directly to the MASTER output without passing through the crossfader
8. CHANNEL VU meters: to monitor the input level of each channel. The RED Leds should never be
continuously on. This means your signal will be distorted, what can damage your sound system !
9. INPUT SOURCE SELECTOR: Used to select the desired source input on each channel: Mic, Phono,
line or USB.
Note that for channels 2 and 3, you have to choose [PHONO] or [USB] on the back of the unit
10. GAIN LEVEL: Adjusts the input level on each channel. Note that the RED Leds of the channel VU meter
should never be continuously on. This means your signal will be distorted, what can damage your sound
system !
11. HIGH FREQUENCY TONE CONTROL: The high frequency of each channel can be controlled
separately over a range from -26dB to +12dB. In the center position the tone control is flat. (switched off)
12. MID FREQUENCY TONE CONTROL: The mid frequency of each channel can be controlled separately
over a range from -26dB to +12dB. In the center position the tone control is flat. (switched off)
13. LOW FREQUENCY TONE CONTROL: The low frequency of each channel can be controlled separately
over a range from -26dB to +12dB. In the center position the tone control is flat. (switched off)
14. MASTER output VU METERS: to monitor the signal level of the [MASTER] output. Note that the RED
Leds VU meter should never be continuously on. This means your signal will be distorted, what can
damage your sound system !
15. [POWER] LED: this LED will be lit when the power of the unit is switched on.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems BATTLE4-usb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems BATTLE4-usb in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JB systems BATTLE4-usb

JB systems BATTLE4-usb User Manual - German - 8 pages

JB systems BATTLE4-usb User Manual - Dutch - 8 pages

JB systems BATTLE4-usb User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info