602011
106
Zoom out
Zoom in
Previous page
1/110
Next page
104
1. The presser foot pressure is not adjusted correctly
2. The correct presser foot is not being used.
1. The feed dog is packed with lint.
2. The presser foot pressure is too weak.
3. The stitches are too fine.
4. The fabric is not fed when sewing is starting.
5. The feed dog is lowered.
6. The correct presser foot is not used.
1. The machine is not plugged in.
2. A thread is caught in the hook race.
3. The control circuit is not working correctly.
4. The Start/Stop button is used for ordinary sewing
with foot control plugged in.
1. Something is caught between the carriage and the
arm.
2. The carriage is touching something around the
machine.
1. The correct presser foot is not used.
2. The needle thread tension is too light.
3. The stitch length is not suitable for the fabric being sewn.
4. Feed balancing dial is not properly set.
5. Interfacing is not used for sewing stretch and very fine
fabrics.
6. The embroidery hoop Attaching Knob is loose.
7. The carriage is bumping into something around the
machine.
8. The fabric is not pulled tightly enough on the embroidery
hoop.
9. The fabric is caught or pulled for some reason when
sewing embroidery.
1. The stitch length is not suitable for the fabric being sewn.
2. The feed balancing dial is not set properly.
3. Interfacing is not used with stretch fabric.
1. The bobbin winder spindle is in the winding position.
2. The control circuit is not working correctly.
3. The key position is out of alignment.
Slipping fabric
The cloth is not
feeding
smoothly.
The machine does
not run.
Strange sounds occur
when the machine is
switched on.
Patterns are dis-
torted.
The automatic
buttonhole
stitches are not
balanced.
Pattern selection keys
do not work.
See page 20.
See page 11
See page 101.
See page 20.
Make stitches coarser.
See page 27.
See page 20.
See page 11.
See page 6.
See page 101.
Turn the switch off and turn
it on again.
See page 7.
Remove the object.
See page 78.
See page 11.
See page 19.
See pages 30, 33.
See page 74.
Use an interfacing.
See page 78.
See page 78.
See page 77.
Stop the machine and free
the fabric.
See pages 30, 33.
See page 74.
Use an interfacing.
See page 13.
Turn the switch off and turn
it on again.
See page 24.
Problem
Cause
Reference
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 9700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 9700 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info