602025
69
Zoom out
Zoom in
Previous page
1/70
Next page
67
Troubleshooting, cont’d
• When message appears on the screen
The liquid crystal display shows “ BOBBIN WINDING ”.
After the bobbin is wound, return the bobbin winder to its
original position by moving the spindle to the left.
The message “ STOP FOR SAFETY PURPOSES.......... ”
appears on the screen when the machine is overloaded.
Stop operating the machine until this message
disappears (about 15 seconds).
Condition
The machine
doesn’t work.
Patterns are
distorted.
The automatic
buttonhole stitches
are not working.
Noisy operation
Machine stalls and
the message
“STOP FOR
SAFETY
PURPOSES”
appears on the
screen.
Cause
1. The machine is not plugged in.
2. A thread is caught in the hook race.
3. The bobbin winder spindle is still in the winding position.
1. The correct presser foot is not used.
2. The needle thread tension is too tight.
3. The stitch length is not suitable for the fabric being sewn.
4. Feed balancing dial is not set properly.
5. Interfacing is not being used for sewing stretch and very fine fabrics.
1. The stitch length is not suitable for the fabric being sewn.
2. The feed balancing dial is not set properly.
3. Interfacing is not used with stretch fabrics.
4. The presser foot is not the correct one.
5. The machine setting is incorrect.
1. There is thread caught in the hook race.
2. Lint has built up in the bobbin holder or hook race.
3. Slight humming sound coming from internal motor.
4. The feed dogs are packed with lint.
1. Lint has built up in the hook race.
2. Needle or bobbin thread is not correctly threaded.
3. The fabric is too thick.
Reference
Page 6
Page 64
Page 17
Page 13
Page 22
Make stitch adj.
Page 55
Page 29
Make stitch adj.
Page 55
Page 29
Page 13
Page 34
Page 64
Page 64
Normal
Page 64
Page 64
Page 18, 19
Page 24
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4400 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info