472817
91
Zoom out
Zoom in
Previous page
1/93
Next page
89
PROBLEMS AND WARNING SIGNALS
Warning Sign Cause
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
The machine will stop if the buttonhole is sewn
without lowering the buttonhole lever.
The power is turned on without the foot
control being connected.
(A): The machine is started without lowering
the presser foot. (B): The presser foot lifter
at its extra highest position.
The thread cutter button is pressed with the
presser foot raised.
The machine will stop if the presser foot is
raised while sewing.
The power is turned on while depressing the
foot control.
The foot control is released while sewing a
locking stitch.
The power is turned on with the needle in the
down position.
The auto thread cutter button is pressed when
the machine is still initializing after turning the
power on. Pressing the thread cutter button 4
times in a row
Press the start/stop button with the foot control
being connected.
The foot control is disconnected while
sewing.
Connect the foot control
and restart the machine.
Disconnect the foot
control.
Release the foot control.
Press the up/down
needle button to raise the
needle.
Lower the presser foot and
start the machine.
Lower the presser foot and
press the thread cutter
button again.
Lower the buttonhole
lever and restart the
machine.
Depress the foot control
again to let the machine
stop automatically.
Press the thread cutter
button after the machine
stops.
Try this
(A)
(B)
When pushing the bobbin winder stopper to
the left.
Press the bobbin winding
button.
When the bobbin winding button is pressed
without pushing the bobbin winder stopper to
the left.
Push the bobbin winder
stopper to the left.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome MC6600P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome MC6600P in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info