472831
41
Zoom out
Zoom in
Previous page
1/43
Next page
39
Audible signal The buzzer sounds when:
Pip Normal operation
Pip-pip-pip Invalid operation
Pip-pip-peep Buttonhole sewing completed
Peep Malfunciton
The start/stop button is pressed with the foot
control being connected.
The foot control is connected or disconnected
while sewing.
Disconnect the foot control.
Turn the power switch off when
connecting or disconnecting the
foot control.
Problems and Warning Signals
If a buzzer sounds and the indicator shows a warning sign, follow the guidance below.
The machine is re-started too soon after it
has halted due to the overload.
Wait for at least 15 seconds to restart.
If threads are jamming, remove
jammed threads.
The machine is malfunctioning due to a
problem in the electronic components.
Contact the service center or the
store from where the machine was
purchased.
Warning signal
Selecting a pattern after buttonhole is completed
with the buttonhole lever still lowered.
The bobbin winder spindle is shifted to the right
for bobbin winding.
Raise the buttonhole lever and re-
select the pattern.
Do not sew other pattern with the
buttonhole foot.
Return the bobbin winder spindle
to the left.
Problem
Try this
The buttonhole is sewn without lowering the
buttonhole lever.
Lower the buttonhole lever and
restart the machine.
to
NOTE:
The safety device will shut the power down when the machine is locked. If the threads are jamming, remove
the jammed threads and turn the power on again after 3 minutes.
It is not abnormal that a faint humming sound is coming from the internal motors.
The machine is started without lowering the
presser foot.
Lower the presser foot and restart
the machine.
41


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info