602000

Janome 5024 Excel II Decor Manual

40
Zoom out
Zoom in
Previous page
1/41
Next page
38
Condition
The needle thread
breaks.
The bobbin thread
breaks.
The needle breaks.
Skipped stitches.
Seam puckering.
The cloth is not
feeding smoothly.
Cause
1.The needle thread is not threaded properly.
2.The needle thread tension is too tight.
3.The needle is bent or blunt.
4.The needle is incorrectly inserted.
5.The needle thread and the bobbin thread are not set properly
under (drawn to the rear of) the presser foot when sewing is
starting.
6.The fabric is not drawn to the rear when sewing is finished.
7.The thread is too heavy or too fine for the needle.
1.The bobbin thread is not threaded properly in the bobbin
holder.
2.Lint has collected in the bobbin holder.
3.The bobbin is damaged and doesn’t turn smoothly.
1.The needle is incorrectly inserted.
2.The needle is bent or blunt.
3.The needle clamp screw is loose.
4.The needle thread tension is too tight.
5.The fabric is not drawn to the rear when sewing is finished.
6.The needle is too fine for the fabric being sewn.
7.The pattern selector dial has been turned while the needle
was in the material.
1.The needle is incorrectly inserted.
2.The needle is bent or blunt.
3.The needle and/or threads are not suitable for the work being
sewn.
4.A blue tipped needle is not being used for sewing stretch, very
fine fabrics or synthetics.
5.The needle thread is not threaded properly.
6.The presser foot pressure is not strong enough.
7.The wrong needle is used.
1.The needle thread tension is not tight.
2.The needle thread is not threaded properly.
3.The needle is too heavy for the fabric being sewn.
4.The stitch length is too long for the fabric.
5.The presser foot pressure is not correctly adjusted.
1.The feed dog is packed with lint.
2.The presser foot pressure is too weak.
3.The stitches are too fine.
4.The feed dog was not raised after being lowered.
Reference
Refer to page 12
Refer to page 15
Refer to page 8
Refer to page 8
Refer to page 17
Refer to page 17
Refer to page 8
Refer to page 11
Refer to page 37
Change the bobbin
Refer to page 8
Refer to page 8
Refer to page 8
Refer to page 15
Refer to page 17
Refer to page 8
Refer to page 16
Refer to page 8
Refer to page 8
Refer to page 8
Refer to page 8
Refer to page 12
Refer to page 6
Change the needle
Refer to page 15
Refer to page 12
Refer to page 8
Make stitch denser
Refer to page 6
Refer to page 37
Refer to page 6
Make stitch coarser
Refer to page 6
Troubleshooting
… 40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 5024 Excel II Decor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 5024 Excel II Decor in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info