652547

Jacob Jensen Thermometer Sensor Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Before you begin
1. Assign channel/channels for sensor/sensors.
2. Insert batteries for Sensor/Sensors before doing so for the Temperature Station.
3. Place the Sensor as close as possible to the Temperature Station, reset the
Temperature Station after installing/replacing batteries. This will ensure easier
synchronization between the transmission and reception of signals.
The synchronization may take up to 3 minutes.
4. Position the remote and Temperature Station within effective transmisson range,
which, under normal circumstances , is 20 to 30 meters.
Note that the effective range is highly affected by building materials and the
position of the Sensor and Temperature Station. Try different set-ups for best result.
Though the sensor is weather proof, it should be placed away from direct sunlight,
rain or snow.
Installing / replacing batteries and channel
selection
The unit uses two “AAA” size batteries. (Included
- mounted in the battery-compartment).
Follow these steps to install or replace the batteries:
1. Open the battery-cover on the back of the Sensor.
2. Unscrew the 6 screws securing the battery
compartment lid.
3. Select the channel no. on the CHANNEL slide
switch.
4. Mount the batteries as indicated by the
polarity symbols (+/-) marked inside the battery
compartment.
5. Replace the lid and tighten screws.
6. Replace the battery-cover. Replace the batteries
when the low-battery indicator of the particular
channel appears on the Temperature Station.
(Repeat the steps described in the section
Before you begin).
Note: Once a channel has been assigned to a Sensor,
it can only be changed by moving the slide switch
to another channel, and then repeating the steps
described in the section Before you begin.
Getting started
Once batteries are installed in the Sensor(s), the
Sensor(s) will start to transmit temperature readings
at approx. 30-second intervals. The Temperature
station will search for signals for about 3 minutes,
once batteries are installed.
Upon successful reception, the individual channel
temperatures will be displayed.
The Temperature Station will automatically update its reading every 30 seconds. If
no signals are received, blanks “- - -.-” will be displayed. Press CHANNEL and MIN/
MAX simultaneously to enforce another search for about 30 seconds. This is useful
in synchronizing the transmission and reception of the sensors and the Temperature
Station.
Specifications
Operating temperature : -20˚C to 60˚C (-4˚F to 140˚F)
Temperature sensing cycle : around 30 seconds.
RF Transmission Frequency : 433 MHz
Maximum nos. of Sensors : 3
Power source : 2 pcs. UM-4 or “AAA” size batteries
Battery life : Approx. 1 year
Dimensions : 52 x 140 x 22 mm
Weight : 126 g
Environmental concerns and disposal
Electric and electronic appliances and enclosed batteries contain materials,
components and substances that can be damaging to people’s health and to the
environment, if the waste is not disposed of correctly.
Electric and electronic appliances and batteries are marked with a crossed-out wheelie
bin symbol as illustrated below. It indicates that electric and electronic appliances and
batteries are banned from being disposed of as general household waste, and have to
be collected separately.
Please ask you dealer about current means of disposal.
- The content of this manual is subject to change without further notice.
- The manufacturer and its suppliers hold no responsibilities to you or any other
person for any damages, expenses, lost profits or any other damages arisen by
using this product.
UK
JACOB
JENSEN
TM
Sensor (registered design)
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen Thermometer Sensor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen Thermometer Sensor in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info