520196
19
Zoom out
Zoom in
Previous page
1/23
Next page
35
H.1. Setting Ringer Volume & Ringer Type
Ringer Volume
Key Map:
Audio Setting Ringer Volume
select the volume
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
2. Press / to select ”Ringer Volume” and press
3. Press / to select the volume you want. (you
will hear a sample of each as you scroll through), then
press to confirm.
4. Press
to exit and return to standby. If you select
Volume ”Off”, will be displayed.
Ringer Type
Key Map:
Audio Setting Ringer Type
select the option select the ringer type
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
2. Press / to select ”Ringer Type” and press
3. Press / to select the ”External”, ”Internal”,
”Paging”, ”Alarm”, or ”Appointment” and press to
confirm.
4. Press
/ to select the melody you want. (you
will hear a sample of each as you scroll through), then
press to confirm your selection.
5. Press
to exit and return to standby.
H.2. Appointment
Key Map:
Time & Alarm Set Appointm. – Select
your appointment
The date and time must be set before you can access the
Calendar menu option. To set date and time, see section
D.3. Setting date/time
. Your phone allows you to set five
personalized date and time appointments.
1. Press
to access the main menu.
2. Press
/ to select ”Time & Alarm”. Press
3. Press / to select ”Set Appointm.”. Press
4. Press /
to select one from ”Appointment 1”
to ”Appointment 5”. Press
5. Press
/ to select ”On”. Press
6. Enter date and time for the appointment. Refer to D.3.
Setting date/time. Press
7. Enter the appointment name using the keypad (up to 13
characters). Press
I. ADVANCED OPERATION
Special Attention!!
The following sections are only for users who are familiar
with electronics products. Failure in following steps correctly
may stop your DECT phone from normal operation.
I.1. To register a cordless handset
When you register a cordless handset to your base, you will
be asked to enter your base PIN code. To enable registration
mode on the base unit, press and hold the PAGE button for
five seconds. The LED on the base will flash one time when
registration mode is enabled. Before registration, make sure
the new handset is fully charged and that you have the base
and the handset in front of you. Also, make sure that all
handsets and the base are in standby.
On the handset you want to register:
Key Map:
Add. Settings Register select
the base number
1. Press to access the main menu.
2. Press
/ to select ”Add. Settings” and press
3. Press / to display ”Register” and press
to confirm.
4. Press
/ to select your base number and press
to confirm.
If the base already has the maximum number of six handsets
registered, you will need to deregister one of the existing
handsets before you can register the new handset. See
section I.2. Deregister a handset or a base.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen 50 DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen 50 DECT in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info