Manual Jabra sp 500 (page 5 of 8) (English)

232644

Zoom out

Zoom in

1/8

English

Using voice-dialling (if supported by your phone)

1. Press and release

once. You’ll hear

one short beep while doing this.

2. You’ll then hear the voice-activation tone; say the name of the person you wish to

call.

NOTE:

Record voice tag via your mobile phone. If you have a Nokia phone you will

able to record the voice tags via your Speakerphone.

Using your mobile phone’s keypad

1. Dial number on keypad.

2. Press phone’s “send” key.

3. The Jabra SP500 has automatic volume control and will automatically adjust the

speaker

volume based on the relevant back ground noise. In order to adjust the

volume according to your own preferences, use the volume control wheel.

Making a call

•

Press and release

once

•

End call from your mobile phone’s keypad

Ending a call

•

To enable mute press the

mute button

for one second and y

ou will hear a short

beep.

You’ll see

solid

yellow

light.

To disable mute function press the

mute button

briefly.

Muting a call

Answering a call

•

After you hear the ring tone, press and release

once.

•

Answer the call with your mobile phone’s keypad. You may then need to transfer the call

to the speakerphone by pressing and releasing

once (depending on your phone).

1. Ensure SP500 is switched on.

(See section 3)

2. Press the Pairing button until you see a

solid blue

light (approximately 2 seconds),

then

release

. Your Speaker phone is now in pairing mode.

3. Set your Bluetooth phone to “discover” the speakerphone by following your

phone’s instruction guide. Typically, the steps involve going to a “setup”, “connect”,

or “Bluetooth” menu

on your phone

and then selecting the option to “discover” a

Bluetooth device*.

(See example from a typical mobile phone in fig. 2)

4. Your phone should find the “Jabra SP500” speakerphone and ask if you want to pair

with it. Confirm by pressing “yes” or “ok”.

5. Enter

passkey or PIN

= 0000 (4 zeros)

, then press “yes” or “ok”

IMPORTANT:

If pairing was successful, the

blue

indicator light will briefly flash rapidly

before going back to flashing

blue

every 3 seconds. You will also hear the confirmation

melody. If unsuccessful, the light remains solid, and you’ll need to re-attempt pairing.

(See steps 3–5 above)

“Pair”

with your Bluetooth mobile phone

USING YOUR Jabra SP500

Before using your Jabra SP500, ensure that the batteries are charged and the Jabra SP500

is paired (see item 3) with your Bluetooth mobile phone and switched on.

The speakerphone can be used while being recharged from a wall socket or from the car

charger.

•

It is recommended that you use your mobile phone’s keypad which typically

involves pressing the “send” button.

•

Press and hold

until you hear two beeps to answer the incoming call and switch

between calls

(some

phones do not support call-waiting via this method).

Call-waiting

To avoid the Jabra SP500’s LED lights from distracting you when driving at night the LED

lights will be switched off 1 min after an active call. It is also possible to prevent the LED

from flashing by pressing and holding the mute button for 10 seconds until you hear a

second beep. The Jabra SP500 will still function during this time. When you switch off

the unit and then switch it back on again the LED lights will commence flashing again.

Indicator light

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jabra sp 500 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jabra sp 500 Manual

Product: