233022
1
Zoom out
Zoom in
Previous page
1/2
Next page
Set-Up Guide
GN9350e
Welcome to Microsoft Office Communicator!
Using this headset with Office Communicator will provide a simple, more consistent audio experience than using the microphone
and speakers on your computer (if available). You can also use this headset to answer calls on your Deskphone.
How to Connect and Configure Your Hardware:
1. First, be sure to connect your GN9350’s cables:
A. Connect the port labeled with a telephone icon
(A) to the headset port in the back of your phone.
B. The power cable (B) is connected to power.
C. The USB port (C) is connected to a USB port on
your computer.
2. Next, remove the cover from the base (D).
3. Your configuration settings are shown on the LCD
display (E) and you scroll through them and set them
with the directional pad (F).
4. Working through the settings tab from left to right,
make sure they are set to the following settings:
Transmit Volume: 8/12
Hookswitch: GN RHL
Range/Power: Very Low
Sound Mode:
A. At the top of the list select Normal
B. Scroll down to the bottom of the list and select
Switch Protection Level (Intellitone): Level 0
5. Finally, set the Clear Dial Tone Switch (G) to position A.
Setup Instructions:
After connecting and configuring your hardware following
the instructions to the left, follow these instructions to finish
your setup:
1. Connect the headset to the base and allow to fully
charge. 4 green LEDs on the front of the base will light
up from left to right as the headset charges. The headset
is fully charged when all 4 LED’s are lit. (this will take
about 3 hours).
2. Open Communicator 2007 R2.
3. Click the drop down arrow on the upper left corner.
4. Select the Tools option.
5. Select “Set Up Audio and Video…”
6. On the first pane you will set the Handset or Headset
you want to use. Make sure that Headset (GN9350)
is selected in the drop down menu.
7. Click Next.
8. On this pane, you will configure your Speakerphone.
If you use a USB speakerphone (like the Polycom CX100)
then leave it configured here and skip to step 11.
9. Make sure the Headset (GN9350) is listed as your
speaker and microphone in the appropriate boxes.
(See graphic at right) You may need to set the top drop
down menu to Custom in order to change these settings.
10. Click Next.
11. On the next pane, you will set the audio output location
for your program sounds. It is recommended that you
use your PC speakers for this setting if you have a sound
card and speakers available.
12. When you have selected the output location, click the
Finish button.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jabra gn9350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jabra gn9350 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jabra gn9350

Jabra gn9350 User Manual - German, Dutch, Italian - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info