554926
2
Zoom out
Zoom in
Previous page
1/2
Next page
Wireless Remote Controller UC-222 2 / 2 MDU51104
Multiple UC-222’s can be used with a control panel and each
UC-222 can also receive signals from more than one control panel (up
to 8). No other items (remote controls or detectors) can be enrolled
when the UC-222 is used with the JA-60K control panel.
This allows the UC-222 unit to control power appliances automatically
with a signal from the alarm system. For example: switch on lights
when you enter a house , switch off an appliance when you are leaving
(arming), control an electric door lock etc.
Setting remarks
newly enrolled items are added to previously enrolled ones
after 30 items are taught, no other item can be added. In mode 4,
the JA-60K, JA-60D and JA-60N are limited to only 8 items.
if one item is taught for multiple modes, only the last taught mode
will remain in the UC-222’s memory
you can combine different modes for different items. Only the
JA-60K, JA-60D and the JA-60N in mode 4 cannot be combined
with other items.
The selected setting mode will close after an item is enrolled, or,
automatically after 10 seconds
Operation remarks
every time a pulse mode is activated by a signal from a remote
control, detector etc. a new time count will start.
An item enrolled to the UC-222 can also be used for other de-
vices. For example: the other pair of buttons of RC-40 can control
Jablotron’s car alarm, home security system etc. Also it is possi-
ble to control a garage door opener if the simultaneous pushing of
A&B (1&2) buttons has been enrolled to a UC-222 controller. In a
similar way, JA-60 detectors can work with a JA-60 control panel
and the same detectors can also simultaneously be used with a
UC-222 for house automation.
Erasing items from the memory
All enrolled remote controls (or JA-60 items) can be erased from the
UC-222’s non volatile memory:
open the external cover
use the setting button to enter the 4
th
setting mode
when the 4
th
LED is flashing, press the UC-222’s setting button and
hold it until all indicators flash for a moment
The receiver’s memory will now be erased
Note: Although this product does not contain any harmful materials we
suggest you to return the product to the dealer or directly to the producer after
usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Po d Ska lko u 3 3
466 01 Jablonec nad Nisou
Czech Republic
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron UC-222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron UC-222 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info