To enable the locking feature unscrew and open the housing and remove the battery. Press the A button
and while pressed reinsert the battery and keep holding the A button until the LED indicator flashes.
Reassemble the remote control.
To lock keys, press simultaneously any two diagonal buttons (A+2 or B+1) until the LED indicator will
flash. Now all buttons are locked. The LED indicator will rapidly blink if you press any button, but no signal
will be transmitted.
To unlock the keys press any two diagonal buttons simultaneously (the same as locking).
To disable locking – perform enabling procedure (see above), disabling will be indicated by a flash of the
LED.
Enrolling the RC-40 into a receiver
Read carefully the receiver’s instructions. If a simultaneous pressing of A+B is requested to enroll the remote
control (for example into a JA-6x control panel), you can use A+B and also 1+2. This way you can enroll the RC-
40 as two different remote controls (right and left side buttons).
Battery replacement
When the battery is running low and the remote control working range gets shorter, replace it with a new
one (type L1016).
Specifications
Power 6V battery (L1016 type)
Battery lifetime typically 1 year
Frequency 433.92 MHz
Coding digital floating security code
Keypad locking optional feature
Can be operated according to ERC REC 70-03
Complies with EN ETSI 300220, ETS 300683 and EN 50134.
Hereby, Jablotron Ltd., declares that this RC-40 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. Original of the conformity assessment can be found at
the web page www.jablotron.cz
, section Technical support.
Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although
this product does not contain any harmful materials we suggest you to return the product to the dealer or
directly to the producer after usage.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jablotron RC-40 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jablotron RC-40 in the language / languages: English as an attachment in your email.
The manual is 0,2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.