554918
1
Zoom out
Zoom in
Bezdrátové tlačítko RC-28 MFK51102 Bezdrátové tlačítko RC-28 MFK51102
Wireless push button RC-28
The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver
as well as the UC-216, UC-222 and the UC-280 receivers.
Specification
Power 6 V battery (L1016 type)
Battery life time typically 1 year
Frequency 433.92 MHz
Operating environment Outdoor sheltered (use the protection roof)
Operating temperature from -20
o
C to +50
o
C
Operating humidity from 25 % to 75 %
Storage temperature from -20
o
C to +70
o
C
Can be operated according to ERC REC 70-03
Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity
assessment can be found at the web page www.jablotron.cz
, section Technical support.
Installation
Note: Do not install the RC-28 on a metal surface. This could
lead to significant reduction of the working distance
Open the name label cover (see picture).
Unscrew the screw under the cover
Remove the rear part of the button by pressing in
the released screw.
Attach the rear part in the desired location together
with the protective roof.
Install the button to the rear part.
Write the desired name on the label and reattach its
cover
Enroll the button to the receiver(s) – see the
receiver’s installation manual for details
Be careful not to use too much force while handling
the transparent cover. If the cover has to be removed
it is advisable to use a tool to grab the jutting out part
of the cover and pull it up.
Battery replacement
The battery life time for the wireless button is typically one year. After this period you should replace
the battery with a new one. When a new battery is installed, press the button. The red indicator should
flash brightly if the battery is correctly connected.
The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.
Note: Dispose of batteries safely depending on the type of the batteries and local
regulation. Although this product does not contain any harmful materials we suggest
you to return the product to the dealer or directly to the producer after usage.
Wireless push button RC-28
The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver
as well as the UC-216, UC-222 and the UC-280 receivers.
Specification
Power 6 V battery (L1016 type)
Battery life time typically 1 year
Frequency 433.92 MHz
Operating environment Outdoor sheltered (use the protection roof)
Operating temperature from -20
o
C to +50
o
C
Operating humidity from 25 % to 75 %
Storage temperature from -20
o
C to +70
o
C
Can be operated according to ERC REC 70-03
Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity
assessment can be found at the web page www.jablotron.cz
, section Technical support.
Installation
Note: Do not install the RC-28 on a metal surface. This could
lead to significant reduction of the working distance
Open the name label cover (see picture).
Unscrew the screw under the cover
Remove the rear part of the button by pressing in
the released screw.
Attach the rear part in the desired location together
with the protective roof.
Install the button to the rear part.
Write the desired name on the label and reattach its
cover
Enroll the button to the receiver(s) – see the
receiver’s installation manual for details
Be careful not to use too much force while handling
the transparent cover. If the cover has to be removed
it is advisable to use a tool to grab the jutting out part
of the cover and pull it up.
Battery replacement
The battery life time for the wireless button is typically one year. After this period you should replace
the battery with a new one. When a new battery is installed, press the button. The red indicator should
flash brightly if the battery is correctly connected.
The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.
Note: Dispose of batteries safely depending on the type of the batteries and local
regulation. Although this product does not contain any harmful materials we suggest
you to return the product to the dealer or directly to the producer after usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Pod Skalkou 33
46 6 01 Jablonec nad N isou
Czech Republic
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Po d Sk a l k o u 3 3
46 6 01 Jablonec nad N isou
Czech Republic


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron RC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron RC-28 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info