The detector works as an indicator of a room being flooded by water
(e.g. cellars, bathrooms). This information is sent to an alarm system to
send out an alert message. It is connectible to an Oasis alarm system
via a JA-81M wireless detector. Plug it into the IN1 input terminal (red
wire) and GND (black wire). If the detector is triggered (e.g. by a water),
it sends a trigger signal. If the detector goes into a stand-by condition, it
sends a non-triggered signal. The LD-81 takes its power supply from the
JA-81M´s circuit.
It is possible to use the LD-81 with an older type of detector, the JA-60N,
for Profi systems if you insert a 4k7 resistor in series with the LD-81
between the INP (red wire) input terminals and GND (black wire).
Technical specifications
Operating environment II. internal
Operational temperature range -10 to +40 °C
Alarm condition water flood
Complies with EN 50130-4, EN 55022
Jablotron Ltd. hereby declares that the LD-12 overflow detector is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The original of the conformity
assessment can be found on the web site www.jablotron.com
,
Technical Support section.
Note: Dispose of batteries safely depending on battery type and
local regulations. Although this product does not contain any
harmful materials we suggest you return the product to the dealer
or directly to the manufacturer after use.
LD-81
40
53
2.5m
20
3
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jablotron LD-81 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jablotron LD-81 in the language / languages: English as an attachment in your email.
The manual is 0,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.