554836

Jablotron JA-83K Manual

20
Zoom out
Zoom in
Previous page
1/22
Next page
JA-83K control panel installation manual - 20 - MKG51101
13 Programming access codes and cards
Code name Amount Sequence Notes
Service 1 5 NC NC
ice) – a card cannot be used.
e changed but not er
Only programmable in Service Mode.
NC =
new code (must be entered tw
Factory-default service code: 8080
This code can b ased.
Example: 5 4567 4567
Master 1
5 MC N
NC
n stem is totally unset (disarmed)
MC ard (factory default 1234)
ry – a numerical code has to be entered twice, but a card only
rammed as a master code (to have both is impossible).
Th r Code can be chan d but not erased.
Th et/unset and it is assigned to all sections.
To reset the Master Code to the factory default 1234, enter 291 in Service Mode (this will only
ter Code).
ding over the system to the end user easier, we recommend programming the
system card (provided with the control panel) to t
Example:
5 1234 and then presenting the c keypad’s RFID reader
C
O ly programmable if the sy
= master code or c
NC = new code or card ent
presented once
Either a code or a card can be prog
e Maste ge
e Master Code’s reaction is s
affect the Mas
To make han
he master code.
ard to the
User 50
ally unset
erased.
med to it (by using the sequence
d
6 MC nn
NC
Only programmable if the system is tot
MC = Master Code or card.
01 to 50. nn = user code or card position from
NC = new code or card entry.
er codes and cards are Factory default: all us
Each user position can have both a card and a code program
6 MC nn NC twice)
Each user code can have its own reaction programmed by an installer in Service Mode, an
with a split system, codes can be assigned to different sections.
Example:
6 1234 12 4345 (code 4345 will be programmed to user position 12)
To erase codes/cards enter:
6 MC nn 0000 erases the code and the card in user position nn.
6 MC 00 UC erases the code UC (or card UC) if programmed to any user position.
6 MC 00 0000 erases all user codes and cards in user positions 01 to 50.
fig. 19 Programming access codes and cards (only in the disarmed state)
… 20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-83K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-83K in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info