554792
18
Zoom out
Zoom in
Previous page
1/23
Next page
Code programming is only possible when the system is unset
(disarmed) and in Operating mode. When the system is in
Maintenance mode, code programming is disabled.
The most convenient way to administer codes is by using a PC
running Olink software select the “Codes” menu option.
16. Bypassing
In practice, you may need to set (arm) the system while excluding particular
zones (potential sources of alarms). This exclusion is referred to as a bypass.
To set up a bypass:
1. Press key 1 to open the bypass menu while in maintenance mode.
2. Using the
and keys, you can scroll through all potential alarm
sources. Select the source (detector, controller…) which you want to
bypass and:
a. press key 2 to bypass the source for the next setting/unsetting
cycle (the
indicator will start flashing),
b. press key 3 to bypass the source permanently (the
indicator will light continuously).
c. Multiple pressing and holding of the keys (2 or 3) will toggle
the bypass on off on …
d. Using key 4 will cancel all device bypasses in the system.
3. All the desired bypasses can be reprogrammed by repeating step 2.
4. Press the # key to exit the bypass menu. Pressing # again exits
maintenance mode.
Notes:
If a system with bypassed devices is being set, then bypass text will be
displayed on the keypad unit.
Any bypass programmed for a single setting/unsetting cycle will be
automatically cancelled after unsetting (disarming) the system.
The existing bypass configuration can be checked or modified in the
bypass menu.
If the installer enters service mode all bypasses will be cancelled..
Alternatively, you can cancel all bypasses using key 4 in the bypass
menu.
17. Setting the internal clock
The control panel has a built in real-time clock which is used to time-stamp all
recorded events in the control panel memory. The clock should be set during
installation. However, the administrator can re-set the clock. This can be used
Oasis user manual 14 MKE22102
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-82K OASIS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-82K OASIS in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-82K OASIS

Jablotron JA-82K OASIS Additional guide - English - 1 pages

Jablotron JA-82K OASIS Installation Guide - English - 22 pages

Jablotron JA-82K OASIS Installation Guide - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info