554834
3
Zoom out
Zoom in
Previous page
1/30
Next page
Contents:
1. Architecture of the control panel 4
2. Configuration of the control panel 5
3. Control panel installation 5
3.1. Power cable wiring 5
4. Antenna of the JA-65R module 5
4.1 Rubber antenna use in the control panel 5
4.2 External antenna use 6
5. Connection of a telephone line to the JA-65X module 6
6. Connectors and terminals of the main board 6
7. The JA-65H hard wired input module terminals 7
8. Wiring of the JA-60 keypad(s) 8
9. Installation of wireless items 8
10. Back up battery installation 8
11. First powering of the control panel 8
12. Control panel programming 9
12.1. Enrollment (teaching) of wireless items 10
12.2. Hard-wired zone input setting 10
12.3. Exit / Entrance delay 10
12.4. Alarm duration 11
12.5. PgX and PgY output functions 11
12.6. Recorded message and phone number editing in the user mode 11
12.7. Radio signal jamming testing 11
12.8. Regular communication checking 11
12.9. Reset enabled 12
12.10. Enrollment of the control panel to a UC-2xx or to a master control panel 12
12.11 No code requested for F1, F2, F3, F4 & F9 12
12.12. Partial (Home) arming with (F2) (non split control panel) 12
12.13. Hard wired siren alarm enabled 13
12.14. Exit delay audible indication 13
12.15. Partial arming exit delay audible indication 13
12.16. Entrance delay audible indication 13
12.17. Arming and disarming chirps with hard wired siren 13
12.18. Siren alarm in Disarm & Partial arming 13
12.19. Wireless siren alarm 14
12.20. Indication of system problems when arming 14
12.21. Control panel splitting 14
12.22. Addressing of wireless detectors to sections 14
12.23. Addressing of the user codes to sections 14
12.24. Addressing of wireless controllers to sections 15
12.25. Automatic arming / disarming setting 15
12.26. New service code setting 15
12.27. Real time and date setting 16
13. System testing 16
14. Voice & Pager message setting 16
14.1. Telephone number entering 17
14.2. Voice message(s) recording 18
14.3. Telephone dialer testing 18
14.4. Dialing method 18
14.5. Telephone dialer triggering 18
14.6. Telephone line checking 18
15. To enable a remote computer to dial in 19
15.1. Reaction to an incoming call 19
15.2. Remote access code setting 19
16. Monitoring station communication setting 20
16.1. Reporting code setting 20
16.2. Account code setting 21
12.3 Protocol and Format setting 21
16.4. Re-dialing pause setting 21
16.5. Phone number entering 22
16.6. Digital communicator reset 22
17. Control panel factory default reset 22
18. Monitoring station report code table 23
18.1. Internal structure of Contact ID protocol 24
19. Personal Computer Interface with PC-60A 25
20. Remote access to the system 26
20.1. Establishing connection with a remote control panel 26
21. Recommended Professional installer basic rules 26
22. Trouble shooting table 26
23. Possibilities to extend the system 27
24. Control panel specifications: 34
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-65 MAESTRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-65 MAESTRO in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-65 MAESTRO

Jablotron JA-65 MAESTRO User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info