Manual Jablotron JA-60U (page 2 of 2) (English)

554886

Zoom out

Zoom in

1/2

Remote Access Modem JA-60U 2/2 MDY51914

Remote Access Modem JA-60U

Note: This manual is intended for professional installers only.

The JA-60U modem is used for the remote connection of a personal

computer with ComLink software to JA-63 and JA-65 control panels

using a public telephone line. It enables a computer to remotely control

a system in the same way as when it connected directly to the JA-63

or JA-65 PC’s output. This version of the modem can be used with

JA-60E for a remote access to a system.

Setting

Connect the modem to the free USB port of the computer using the

enclosed PC-60B interface cable. The modem must be switched off

while connecting. The telephone line cable should be plugged into the

IN modem socket and to the telephone line wall socket. If you want to

hook-up your telephone set, use the OUT socket on the modem for its

connection (when the modem is not activated, you can use the phone

as usual). Now plug-in the modem’s power supply adapter.

Note: the JA-60 modem can be used only with analogue telephone

line (TNV – Telecommunication Network Voltage) and with DC adapter

DE01-12 (SELV – Safety Extra Low Voltage).

In order to enable remote access, you have to have the ComLink

software installed on your computer which can be found on the

enclosed CD (see also PC-60B manual). The latest version of the

Comlink software can be downloaded from the Jablotron Internet site

www.jablotron.com

JA-6x setting

To establish communication between the control panel and the

remote computer, you have to set the JA-6x parameters. All settings

must be made while in the programming mode of the control panel

(letter “P” must be on the display). You can change the parameters by

entering programming strings from system keypad or from a computer

with ComLink software connected to the PC output of the control

panel.

Reaction to an incoming call

This instructs the control panel how to react to calls from a remote

computer. The possible settings are:

050 – access disabled

051 – access enabled with second call (If the panel detects 1 or 2

rings on the first call and then is called again with 10-45 seconds, the

panel will answer the second call on the first ring. This is useful for

bypassing an answering or facsimile machine on the same line as the

panel.)

05x - access enabled by answering the 2nd, 3rd, 4th, 5th or 6th ring

(x = 2 to 6)

Note: Remote access connection can be enabled manually by the

end user (regardless of above settings) by entering string 89 while in

the programming or user mode, when a remote call is ringing.

Factory setting: access disabled

Remote access code

In order to access the panel from a remote computer, it is necessary

to authorize the access by an 8-digit access code. This code is

compared with the one programmed in the control panel. If the remote

computer tries to access the panel with another code, the connection

will close immediately and the wrong code alarm will be triggered.

Store your access code to the control panels by entering:

0 7 x x x x x x x x

x x . . . . . x - 8-digit number

Factory setting: 00000000

Establishing of a connection

Run the ComLink software on a computer equipped with a JA-60U

modem (in Windows version use “REMOTE” button in the tool bar). In

order to establish a connection with a control panel, you have to set in

the Remote access dialog:

a) Control panel telephone number

b) Dialing mode (DTMF or pulse)

c) Serial port number, to which the JA-60U is connected

d) Control panel access code (must be equal to the 8-digit code set

in the control panel)

e) Select for the second call response (if set for in the control panel)

f) Select for the call back feature (if desired) and enter the phone

number for the line connected to the JA-60U. When you use this

setting, the modem will call the control panel and prompt for

communication. After that, the control panel will call back to the

remote PC. This allows the telecommunication costs to be paid by

the JA-6x user (the user should be made aware if this option is

selected for).

Note: Remote access cannot be established when the telephone line

at the control panel is busy.

Remote access

After establishing a connection with the JA-6x control panel, the

ComLink software on the remote computer enables remote use of the

ComLink SW as if the computer is connected directly to the control

panel. You can check the control panel’s status and settings, you can

arm and disarm the system, you can download the events’ list, monitor

the RF field, etc. (see ComLink help file).

Note: Downloading or uploading of extensive data (like event list

downloading, digital communicator setting etc.) takes more time,

compared to a direct PC connection to the control panel.

Maintenance

There is no special maintenance for the JA-60U.

Hereby, Jablotron Ltd. declares that this JA-60U is in compliance with

the essential requirements and other relevant provisions of Directive

1999/5/EC. Original of the conformity assessment can be found at the

web page www.jablotron.com

, section Technical support.

Note: Although this product

does not contain any harmful

materials we suggest you to

return the product to the

dealer or directly to the

producer after usage.

Internet: www.jablotron.cz

Tel.: +420 483 559 999

fax: +420 483 559 993

Pod Skalkou 33

466 01 Jablonec nad Nisou

Czech Republic

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60U in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jablotron JA-60U Manual

Product: