The GBT-212 is designed for the testing of acoustic glass break detectors.
It detects the air pressure changes caused by the flexing or bending of glass
and then automatically generates sound imitating the breaking of the glass. It is
also possible to trigger the sound manually using the test buton.
Operation
Switch on the GBT-212 tester using the ON-OFF slide switch.
The LED will flash rapidly for 4 sec during the warm up period
When the LED is permanently lit, the tester is ready for use.
Place the tester close to the window you want to test. The speaker of the
simulator must face towards the glass break detector.
Hit the glass with a suitable object or with a safety glove. The air
pressure change will activate the GBT-212 and the breaking glass sound
will be generated.
Confirm the correct reaction of the glass break detector and, if it is
necessary, adjust its sensitivity according to its manual.
Next test is possible after apr. 4 sec, indicated by the LED being
continuously lit.
The glass break sound can also be activated by pressing the test button.
Attention! Do not place the tester close to your ears! Keep away from
children!
Manual mode
You can switch the tester to its manual mode. Switch on the GBT-212 tester keeping the test button
pressed. The air pressure detector will be by-passed and the simulator can be triggered only by pressing the
test button. This mode is indicated by a flashing LED.
Battery replacements
Use only quality alkaline 9V batteries for this simulator. When the power voltage drops bellow 8 V, the
LED indication will switch off.
To conserve battery life, the tester switches off automatically when there is no testing for more then 10
minutes. You can switch the GBT-212 on again using the switch.
Specification
Power supply 9 V battery (type 1604)
Power consumption 6 mA in stand by
Max. 200 mA
30 uA after automatic turn off
(the switch remains in the ON position)
Operating range 9 m
Low battery warning from 8 V
Environmental class II. General interior (-10 to +40 °C)
Complies with EN 50130-4, EN 55022
Dimensions 70 x 135 x 29 mm
JABLOTRON ALARMS a.s. hereby declares that the GBT-212 is in
compliance with the essential requirements and other relevant provisions
of Directive 2004/108/EC. The original of the conformity assessment can
be found at www.jablotron.com, Technical Support section.
Note: Although this product does not contain any harmful materials
we suggest you return the product to the dealer or directly to the
producer after use. See www.jablotron.com for details.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jablotron GBT-212 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jablotron GBT-212 in the language / languages: English as an attachment in your email.
The manual is 0,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
