555010
2
Zoom out
Zoom in
Previous page
1/2
Next page
Extending Module CR-11 2/4 MEI51202 Extending Module CR-11 3/4 MEI51202
mode
number
DIP switches
setting
relay no. 1 function relay no. 2 function
1
1sec. pulse after simultaneous
pressing of A&B buttons on the
remote control, when car alarm
is armed
1sec. pulse after simultaneous pressing
of A&B buttons on the remote control,
when car alarm is disarmed
2
relay will change status after
simultaneous pressing of A&B,
on RC, when car alarm is armed /*
relay will change status after
simultaneous pressing of A&B,
on RC, when car alarm is disarmed /*
3
left blinker output signals
(arming, disarming, alarm)
right blinker output signals
(arming, disarming, alarm)
4
lock (pulse duration selectable in the
car alarm setting mode)
unlock (pulse duration selectable in the
car alarm setting mode)
5
immobilization (relay switches ON
when car alarm is disarmed and the
ignition key is ON)
alarm (relay switched ON during
alarm condition)
6
immobilization (relay switches ON
when car alarm is disarmed and the
ignition key is ON)
arming signals (1 pulse = arming,
2 pulses = disarming)
7
courtesy (Dome) light control
(relay follows door switches + 1 minute)
arming signals (1 pulse = arming,
2 pulses = disarming)
8
immobilization (relay switches ON
when car alarm is disarmed and the
ignition key is ON)
courtesy (Dome) light control
(relay follows door switches + 1 minute)
/* with each simultaneous pressing of A&B buttons, the relay will change status (on - off - on ...). The relay will
also switch off 15 minutes or after an arming or disarming
/** the courtesy (Dome) light is on while a door is open (max. 15 minutes) and it will remain on until you
switch on the ignition key (max. 1 minute)
Examples of use
1. Trunk release by simultaneous pressing of A&B buttons on the remote control
Select mode no. 1 on the CR-11 module and disable the Panic alarm in the car alarm setting. It can be
used with CA-10 and CA-32x car alarms. Opening of trunk with remote control is only possible when the
car alarm is disarmed.
2. Additional immobilization and an additional siren
Select mode number 5 on the CR-11 module. The additional immobilization provides a higher safety
level, because it is impossible to bypass it even when somebody is tampering directly with the wire harness
of the car alarm unit (CR-11 is waiting for digital data from the car alarm). The additional siren sounds
during the alarm period (the car horn can also be used as the additional siren). This connection can be
used with the CA-10 and the CA-32x car alarms.
3. Central locking additional installation
Select mode number 4 on the CR-11 module. Duration of 0.3 sec. should be selected in the car alarm
setting mode. This connection can be used with the CA-10 and the CA-32x car alarms. Similar connection
can also be used for original central locking actuators when your car has them already installed.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CR-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CR-11 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info