554993
4
Zoom out
Zoom in
Previous page
1/9
Next page
1918
ENEN
MZZ56200MZZ56200
b) Bottom of the Receiver
10. Pair Button This button is not used for Tiny monitor.
c) Side of the Receiver
11. Night Light Button – Press to turn the night light ON or OFF remotely on the active camera.
12. Alarm +/- ButtonTo set the volume level of the transmitted sound and of the receiver beeping.
13. Power Button – Press to turn the receiver ON or OFF.
14. Audio and Video Output – The receiver can be connected with a TV, monitor or a recording device via
the included audio / video cable to view video from a camera. The same output is on the receiver cradle.
NOTE: When the audio / video cable is connected the LCD screen turns off. The LCD screen will turn
back on when the audio / video cable is disconnected.
15. Power Input (9V DC) – For connecting of power adaptor (included in the kit).
d) Receiver Cradle Inputs
16. Audio and Video Output – Connect the included audio / video cable to view video from the receiver
on a TV, monitor or to record it (when docked).
NOTE: The Audio and Video Output function will not work if the cradle is not connected to the mains.
When the audio / video cable is connected, the LCD screen is switched off. It is switched on again
when the audio / video cable is disconnected.
17. Power Input (DC 9V) – Connect the included power adaptor (DC 9V) to the receiver cradle to power
the receiver or to charge the receiver accumulaor (when docked).
RECEIVER INSTALLATION
You can use the wireless receiver in the receiver cradle or you can connect the mains cable directly to
the receiver:
1. Carefully unpack the receiver and the receiver cradle.
2. Place the receiver cradle or receiver in a place that will have clear reception from your camera.
3. Plug the AC adaptor power cable into the input socket on the cradle or on the receiver and connect
it to the mains.
4. The receiver should be charged for 6 hours prior to rst usage so the built-in rechargeable battery
is fully charged. Do not remove the adaptor cable from the receiver or the cradle during the initial
charging process. After this, the receiver should be charged as required.
5. If you would like to view the video on a larger screen, connect the included AV cable to the cradle or
receiver, and connect the other end of the cable to the Video IN (yellow) and Audio IN (white) ports
on the TV or other device.
NOTE: The video resolution is set for VGA (640x480 pixels), so the picture might be grainy when
displayed on the larger screen. This is not a product defect. For best TV performance use the PIP
(Picture in Picture) TV function. This function allows you to view a TV program as well as the video from
the camera placed in a small window in the corner.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CMD6129S Tiny at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CMD6129S Tiny in the language / languages: English as an attachment in your email.

The manual is 9,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info