Back-up Power Supply BP-12 2/2 (A5) MBC511 04 Back-up Power Supply BP-12 2/2 (A5) MBC511 04
Back-Up Power Supply BP-12
BP-12 set should be used everywhere where 12V DC back-up power supply is required.
Specification
input power supply adapter DE-20-15 (230 V AC / 15 V AC)
600 mA, 1.6 A fuse
back up battery 12V / 1.3 Ah - model Jablotron SA-214/1.3
output voltage 10,5 - 13.5 V DC, 1.6 A fuse
output current 400 mA permanent, (short time max. up to 1 A )
operating temperature -10
°C to +40 °C
complies with the essential requirements of: 89/336/EC EMC Directive - Protection concerning electro-
magnetic compatibility when is used for its intended purpose.
Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.
Contents
Plastic case with rubber sealing (125x85x55 mm), power supply PCB, adapter DE-20-15, battery
SA-214/1.3, dowels and screws.
Installation
Unscrew the plastic box cover andtake out the
battery. Install the plastic box on desired place
using enclosed dowels and screws. Put the in-
put and output wires through the holes in the
box. Fix the PCB with electronics to connectors
of the battery. Connect input and output wires to
the terminals and place the set inside the plastic
box. Put the sealing in the cover and close the box. Fix it with screws.
Important
Handle the back-up battery with caution! The battery can cause serious damages or injury when
being short circuited!
Operation
When 15 V AC input voltage is present, the battery is being charged and the green LED is lit. If
the input voltage is not present, the green LED is off and output voltage is supplied by the battery.
Presence of the output voltage 12 V DC is indicated by yellow LED.
Troubleshooting
Yellow LED is off
1/ The battery may be discharged (due to long absence of input power)
2/ Check the built-in fuses.
Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this
product does not contain any harmful materials we suggest you to return the product to the dealer or directly
to the producer after usage.
Back-Up Power Supply BP-12
BP-12 set should be used everywhere where 12V DC back-up power supply is required.
Specification
input power supply adapter DE-20-15 (230 V AC / 15 V AC)
600 mA, 1.6 A fuse
back up battery 12V / 1.3 Ah - model Jablotron SA-214/1.3
output voltage 10,5 - 13.5 V DC, 1.6 A fuse
output current 400 mA permanent, (short time max. up to 1 A )
operating temperature -10
°C to +40 °C
complies with the essential requirements of: 89/336/EC EMC Directive - Protection concerning electro-
magnetic compatibility when is used for its intended purpose.
Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.
Contents
Plastic case with rubber sealing (125x85x55 mm), power supply PCB, adapter DE-20-15, battery
SA-214/1.3, dowels and screws.
Installation
Unscrew the plastic box cover andtake out the
battery. Install the plastic box on desired place us-
ing enclosed dowels and screws. Put the input and
output wires through the holes in the box. Fix the
PCB with electronics to connectors of the battery.
Connect input and output wires to the terminals and
place the set inside the plastic box. Put the sealing
in the cover and close the box. Fix it with screws.
Important
Handle the back-up battery with caution! The battery can cause serious damages or injury when
being short circuited!
Operation
When 15 V AC input voltage is present, the battery is being charged and the green LED is lit. If
the input voltage is not present, the green LED is off and output voltage is supplied by the battery.
Presence of the output voltage 12 V DC is indicated by yellow LED.
Troubleshooting
Yellow LED is off
1/ The battery may be discharged (due to long absence of input power)
2/ Check the built-in fuses.
Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this
product does not contain any harmful materials we suggest you to return the product to the dealer or directly
to the producer after usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Pod Skalkou 33
466 01 Jablonec nad Nisou
Czech Republic
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Pod Skalkou 3 3
466 01 Jablonec nad Nisou
Czech Republic
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jablotron BP-12 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jablotron BP-12 in the language / languages: English as an attachment in your email.
The manual is 0,04 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
