607097
15
Zoom out
Zoom in
Previous page
1/16
Next page
JABLOCOM User’s Guide
HB53019_ENG.doc 13 www.jablocom.com
SERVICE MENU
From the standby screen type SERVICE on the QWERTY keypad (the words will not be shown on the display and the phone will beep during
typing). The Service menu will open. If you make a mistake while typing, pick up the receiver and hang up before making a new attempt. You can
scroll through the following options:
Firmware version – shows FW version and IMEI of the phone.
Display contrast – select a number using the scroll keys.
Backlight – select a number using the scroll keys to set the LCD backlight level for standby mode if powered by AC adapter.
Volume control – adjusts the volume for microphones, speakers and tones.
Battery voltage – displays battery voltage.
Factory settings – restores factory default settings and erases all items in the memory: Phonebook, Messages, Call registers. The Date
and time will not change.
The following special function codes can be entered in the service mode:
*P1# – activates unprotected access – users do not need to enter a PIN code to access their SIM card (factory setting).
*P0# – deactivates the function mentioned above – users must enter their PIN code to access their SIM card.
*A1# – activates automatic switch-on – connecting the AC power supply will automatically switch-on the phone (factory setting).
*A0# – deactivates the function mentioned above – connecting the AC power supply will not automatically switch-on the phone.
*N1# – activates the display of a network name on the LCD panel (factory setting) – i.e., the network name in which the phone is currently
registered will be displayed, some special SIM cards may show their own phone number instead of a network name.
*N0# – deactivates the function mentioned above – removes the network name displayed on the LCD panel.
*S0# – deactivates the function of SMS sending confirmation for test messages with more than 160 characters.
*S1# – activates the function of SMS sending confirmation for test messages with more than 160 characters.
*E0# – deactivates the function of automatic SMS replacement if the incoming SMS memory is full. User is required to erase messages
from inbox.
*E1# – activates the function of automatic SMS replacement if the incoming SMS memory is full. Phone erases the oldest message from
inbox automatically.
*R0# – deactivates the function of automatic SMS status report. If the function is not active, messages remain in “being delivered” status
with “winged” envelope displayed.
*R1# – activates the function of automatic SMS status report.
*Dxy# - sets date format where x represents date format (1 = german DDMMYY, 2 = american MMDDYY, 3 = japan YYMMDD) and y
represents date separator(1 = ".", 2 = "-", 3 = "/")
The # sign always ends each coded sequence. Afterwards the phone displays “OK“ if the code was entered properly or “Error“ if the code
was entered incorrectly. The codes listed above can only be entered when the phone is in the service mode. All parameters are set to
default ones if the language is changed.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom GDP-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom GDP-02 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablocom GDP-02

Jablocom GDP-02 Quick start guide - English - 2 pages

Jablocom GDP-02 User Manual - German - 16 pages

Jablocom GDP-02 User Manual - French - 16 pages

Jablocom GDP-02 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info