578862

Irox JKTG-2M Manual

1
Zoom out
Zoom in
Previous page
1/4
Next page
KSPO:1099-10
IROX OST12-MANUAL 3(Eng)
SIZE:W80 x H100(mm)
BY Lai HZ 23/7/10
JKTG-2M
Version 1.1
Page 25
Page 26
Page 26
Page 27
Page 29
Page 29
Page 29
Page 29
Page 30
Page 30
Page 31
Page 31
Page 32
Operating Instructions
Table of contents
1. Introduction
2. Operating elements
2.1 LCD display
2.2 Keys / Switch / Battery compartment
3. Putting into operation
4. Operation
4.1 Thermo/hygrometer
4.1.1 MIN/MAX memory
4.1.2 Comfort zone
5. Change of battery
6. Care instructions
7. Support
8. Technical data (display unit)
1. INTRODUCTION
Meteocentrale.ch is the weather forecast website operated by
Meteomedia Ltd.
Meteomedia is one of the leading weather services in Europe and, with its
own Severe Weather Centres in Switzerland and in Germany, among
other things, specialist for modern early warning systems for extreme
weather conditions.
The core of the company is the private weather measurement network. It
is one of the biggest measurement networks in Europe.
Irox, market leader in the manufacturing of measuring devices, and
Meteomedia have developed a joint product line that convinces with its
high quality measurements, simple handling and elegant design.
The JKTG-2M is a high-quality thermo/hygrometer that gives you the
absolutely unique feature of choosing between three different max/min
memory functions.
Please read the instructions carefully. They contain some useful and
interesting information that go beyond a mere explanation of how to
operate the device.
2. OPERATING ELEMENTS
2.1 LCD DISPLAY
All functions are depicted on the liquid crystal display (LCD) in 3 windows.
Full-segment display
Comfort Zone:
- display of the comfort status of the measurement of the
thermo/hygrometer
Thermo/hygro:
- temperature and relative air humidity of the display device (measures at
the location where the device is used)
- memory values min/max of the thermo/hygrometer
- battery status of the display device
2.2 KEYS / SWITCH / BATTERY COMPARTMENT
Rear view
°C/°F
- Changes the unit of temperature in the display from °C to °F or vice versa
MEMORY RESET
- Hold pressed for 3 seconds: Resets all memories. The new recording
now begins depending on the setting of the MIN-MAX switch
MIN-MAX
The MIN/MAX memory is managed and recorded depending on the setting.
Pos. 1: PERM - From the last MEMORY RESET, the MIN/MAX recordings
after the function “drag indicator” are recorded. This recording is
"PERMANENT", i.e. a new recording does not start until after a
new MEMORY reset.
Pos. 2: 24 Hr - If you choose this option, the MIN/MAX values for the last
24-28 hours in each case are recorded. After expiry of this period,
the MIN/MAX values that are older than 24-28 hours are removed
from the memory. As soon as you have selected this option, we
recommend that you start the memory recording in a defined way
with a MEMORY RESET. This then starts a recording that triggers
internally an elaborate calculation and recording. The MIN/MAX
values are administered here in blocks of four hours.
Example: You want to be able to read the MIN/MAX values of the
last 24-28 hours at all times. Irrespective of when you look at the
display, you will always see the extreme values of the last 24-28
hours. Older recordings are deleted in the process.
Pos. 3: DAY- If you select this option, the MIN/MAX values are recorded
for 24 hours in each case. You are free to choose when the
recording should begin. The start is determined by a MEMORY
RESET and after 24 hours, the memory is automatically reset and
a new recording begins. Example: You want to be able to read the
MIN/MAX values of the last 24 hours in each case at 8 p.m. You
therefore carry out a MEMORY RESET at 8 p.m. With this RESET,
the clock begins to tick internally and this automatically resets the
memory after 24 hours and starts a new recording.
Battery compartment
2 x 1.5 batteries of the size AM-4 resp. “AAA”
To open: slide lid in the direction of the arrow (indicated on the lid) after
the stand has been removed.
3. PUTTING INTO OPERATION
1. Open the battery compartment of the display device and remove all
insulation strips. If no batteries are in the device, insert the 2 batteries
(AM-4 or ‘AAA’ 1.5 V) in the correct polarity.
2. Now close the battery compartment.
3. Directly after the activation of the batteries, all segments are displayed
for a few seconds on the display.
4. OPERATION
The JKTG-2M measures the temperature and relative air humidity directly.
The temperature currently measured is displayed in the information
windows in °C (or °F) and, for the location of the display device, the
relative air humidity in % and the Comfort Zone.
The following operations can be made in this function:
4.1 THERMO/HYGROMETER
4.1.1 MIN/MAX memory
a) The MIN/MAX values are always present on the display below the
current measurement value.
- LEFT: Minimal (=lowest) temperature "MIN"
- RIGHT: Maximum (=highest) temperature "MAX"
The logic of the recordings is displayed in Section 2.2 Operating
elements.
4.1.2 Comfort Zone
The Comfort Zone is displayed for the thermo/hygro measurement of the
display device.
The logic is depicted in the following illustration:
5. CHANGE OF BATTERY
: BATTERY CHANGE DISPLAY
The batteries last for around 8-12 months. Depending on the usage of the
appliance and the batteries used, this time can be slightly shorter or longer.
In order to avoid a surprising and unpleasant interruption to operations, the
battery symbol appears in the temperature window. This means that
batteries of the display appliance are becoming too weak and need to be
replaced.
To change the batteries, please note Chapter 3 (Putting into operation).
Please only use new batteries and never mix old and new batteries.
Please also remember that used batteries should not be thrown in the
household rubbish bin but handed in at the designated collection points.
The environment will thank you for it!
23 24
25 26
27 28
29 30
12
12
12
43 44
12
12
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox JKTG-2M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox JKTG-2M in the language / languages: English, Italian as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox JKTG-2M

Irox JKTG-2M User Manual - German, French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info