578873
2
Zoom out
Zoom in
Previous page
1/2
Next page
4.3 BACKLIGHT
It is possible to use the background illumination when setting the alarm
function. This can be very practical in dark bedrooms. Press the
SNOOZE / LIGHT button to activate the background illumination before
beginning. If you continue to press buttons within 8 seconds the light will
remain on.
When the alarm sound is on, the backlight will be on for 8 seconds. After
this, the backlight will blink for the duration of the alarm until it is shut off.
5. CHANGE OF BATTERY
: BATTERY CHANGE DISPLAY
The batteries last for around 8-12 months. Depending on the usage of the
appliance and the batteries used, this time can be slightly shorter or longer.
In order to avoid a surprising and unpleasant interruption of operations, the
battery symbol appears in the time window.
This means that batteries are becoming too weak and need to be replaced.
To change the batteries, please note Chapter 3 (Putting into operation).
Please only use new batteries and never mix old and new batteries.
Please also remember that used batteries should not be thrown in the
household rubbish bin but handed in at the designated collection points.
The environment will thank you for it!
6. CARE INSTRUCTIONS
- Do not expose the device to extreme temperatures or direct sunlight
over longer periods.
- Avoid blows and shocks of any kind to the device.
- For cleaning use a dry soft cloth that you have moistened with water and
a mild cleaning agent. Never use volatile substances such as benzene,
thinner, cleansing agents in spray cans etc.
- When the device is not being used store it in a dry area and out of the
reach of small children.
4.2.3 Stop the alarm
A sounding alarm can be interrupted in three ways:
1. During the sounding of the alarm, press the SNOOZE / LIGHT button to
start the snooze cycle (1-9 minutes).
After the snooze cycle, it will sound again. You can endlessly repeat the
SNOOZE cycle. The symbol will flash during the snooze cycle.
2. Alarm will sound for 2 minutes. If the SNOOZE / LIGHT button is not
pressed during the 2 minutes, the alarm sound will automatically switch
off until the next morning (= 24hr OFF)
3. During the alarm sounding or during the snooze cycle (=blinking ),
press the ALARM button. After pressing once the alarm is interrupted
until the next morning (=24hr OFF; stops blinking). If you press the
button a second time, the alarm will be completely deactivated. This
means it will not sound the following morning!
NOTE: If the snooze cycle of one alarm is active (e.g. AL1) and the other
(e.g. AL2) starts within this cycle, then the first active alarm will go
to 24hr OFF and the second alarm will be continued.
4.2.4 Setting the snooze cycle
Press and hold the SNOOZE / LIGHT button for 3 seconds, you can set
the snooze minutes (1-9 minutes) by pressing the + or – button. Then
press SNOOZE / LIGHT button to confirm.
Current Time
Snooze Minute 1-9
33 34
12
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox JK-18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox JK-18 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox JK-18

Irox JK-18 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info