578944

Irox HBVR761 UV-X Manual

5
Zoom out
Zoom in
Previous page
1/6
Next page
94 95
9392
7b) CALENDAR CLOCK DISPLAY MODES
The clock and the calendar share the same section of the
display. The calendar is displayed in a day-month format.
Each press on the [MODE] button will change the display
between clock with second, clock with day of week, zone
time with day of week.zone time with second and day-month.
7c) HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE] for two seconds
it will show the weekday language. Use [ ] or [ ] to
change it. Press [ MODE ] to confirm. Repeat the same
procedure to set display language, ˚C/˚F, UVI / MED/h, year,
month, date, date-month format, 12/24, hour and minute.
During the setting, press and hold [ ] or [ ] will
increase or decrease the value rapidly.
For display language, you can choose among English (En),
German (DE), French (Fr), Italian (IT) and Spanish (SP) -
in that order. If there is an item you do not wish to change,
simply press [ MODE ] to bypass the item.
When you finished the change, press [ MODE ] to exit.
The display will return to the clock mode.
7d) HOW TO SET THE 2. TIME ZONE
To set the 2. time zone, change to the 2. time zone clock
mode and hold [ MODE ] for two seconds. Use [ ] or
[ ] to change it from -13h to +15h.
When you finished the change, press [ MODE ] to exit.
The display will return to the 2. time zone clock mode.
7e) DISABLE THE RECEPTION OF
THE RADIO CONTROLLED CLOCK
If you are using this product outside the central European
timezone, you may disable the reception of the radio
controlled clock, Press min. 3 Seconds the key [ ] to
disable the automatic time signal reception. The reception
signal [ ] will then disappear from the display.
To re-enable the time signal reception, press again for
min. 3 Seconds the [ ] key.
TREND
TREND
Arrow
indicator
Temperature
Humidity Trend
Steady FallingRising
5e) TEMPERATURE AND HUMIDITY TREND
The trend indicator shows the trend of temperatures and
humidity collected at that particular remote sight.
Three trends: rising, steady, and falling will be shown.
TREND
Indicator
displays
on the unit
Temperature
Range
Humidity
Range
Shows that the
Current
Environment
COM
WET
DRY
No
Indicator
40%RH-
70%RH
OVER
70%RH
Below
40%RH
40%RH
to
70%RH
Ideal range for
both relative
humidity and
temperature
Contains excess
moisture
Contains
inadequate
moisture
No comment
20˚C to 25˚C
(68˚F to 77˚F)
-5˚C -+ 50˚C
(23˚F - 122˚F)
-5˚C -+ 50˚C
(23˚F - 122˚F)
Less than
20˚C (68˚F)
or More than
25˚C (77˚F)
5f) COMFORT LEVEL INDICATORS
The comfort level indicators COM, WET or DRY will tell you
if the current environment is comfortable, too wet or too dry.
The comfort indicators will appear on the display of the main
unit when the following conditions are satisfied:
6. MOON PHASE
6a) HOW TO USE AND SCAN THE MOON PHASE
HBVR761 is equipped with a moon phase display and
scanner with which eight moon phases are displayed on the
screen from new moon to waning crescent. The one falls
on the current day will flash on the screen.
If it is a full moon or new moon day, the icon will flash
faster. The eight phases are:
To check the moon phase for a particular day, press the
[ ] or [ ] (rear panel) button once. The clock will
enter moon phase scanning mode.
Use the [ ] or [ ] (rear panel) button to locate the date
you want to check. The calendar will be day-driven in this
mode. You can go back 39 days travel to next 39 days. The
corresponding moon phase will appear immediately on the
screen. The unit will return to the last display mode when the
[ ] or [ ] (rear panel) buttons are left idle for 2 seconds.
7. RADIO CONTROLLED CLOCK
7a) HOW TO SET THE RADIO
CONTROLLED CLOCK
1.After the batteries are installed. The clock will automatically
search the radio signal. It takes about 3-5 minutes to finish
this process.
2. If user wishs to disable the auto-reception feature, hold
the [ ] button for 2 seconds to disable it.
3. To enable the auto-reception feature again, holds the “Up”
for 2 seconds again to force it receive and allow it receive
at desired time.
4.If the radio signal is received, the date & time will be set
automatically with radio control signal icon [ ] turns on.
5.If the clock fails to receive the time signal, it will be show
as [ ] icon. Then user can set the time manually.
New
Moon
Waning
Crescent
Waning
Crescent
First
Quarter
Waxing
Gibbous
Full
Moon
Waning
Gibbous
Last
Quarter
8. BELL / ALARM
8a) HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [ALARM] once to display alarm time. If the alarm
is disarmed, the time will be displayed as “ OFF ”.
2. Hold [ALARM] for two seconds. The hour digits will
blink.
3. Enter the hour using [ ] or [ ].
4. Press [ALARM]. The minute digits will blink.
5. Enter the minutes using [ ] or [ ].
6. Press [ALARM] to exit.
7. Repeat the same procedure to set single alarm.
8b) HOW TO SET THE ZONE TIME
To set the zone time,
1. Press [MODE] until at zone time display mode,
2. Hold [MODE] for two seconds, the zone time offset
will be displayed.
3. Enter the offset using [ ] or [ ].
4. Press [MODE] to exit.
The alarm “ ” “ ” and “ Pre-AL” icons will be
displayed indicating which alarm is armed. You can also
arm or disarm an alarm by pressing the [ ],[ ] button
at alarm display mode. Press [MODE] to return to clock
display mode.
8c) SNOOZE FEATURE
When the alarm sound is on, press the snooze key enter
snooze mode. After 8 minutes, alarm sound will be wake
up automatically. The snooze cycle will be restarted if
you press the snooze key again.
If you leave the alarm sound on for 2 minutes, it will enter
snooze mode automatically with maximum 3 times.
8d) HOW TO STOP AN ALARM
Press [ALARM] on the unit to stop an alarm.
W
S
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox HBVR761 UV-X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox HBVR761 UV-X in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox HBVR761 UV-X

Irox HBVR761 UV-X User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info