578872
1
Zoom out
Zoom in
GO2
Bedienungsanleitung
Eigenschaften
- Quarz-Uhr mit einfachem Weck-Alarm
- Analoge Anzeige von Stunde, Minute und Sekunde
Tasten
- Wecker Ein/Aus Taste
- Snooze / Licht Taste
- Uhrzeit/Alarmzeit Einstellknopf
Gebrauch
1
Inbetriebnahme
Setzen
Sie eine Batterie vom Typ AA gemäss der gekennzeichneten Polarität ins Batteriefach
ein.
Die Uhr startet automatisch sobald die Batterie eingelegt ist.
2
Einstellen der Uhrzeit
Ziehen
Sie den Drehknopf auf der Rückseite des Gerätes ein Stück raus.
Drehen
Sie den Knopf, bis die gewünschte Uhrzeit eingestellt ist.
Drück
en Sie den Drehknopf wieder rein.
3
Einstellen der Weckzeit
Drehen Sie den Drehknopf auf der Rückseite des Gerätes, bis der kleine Zeige auf die
gewünschte Weckzeit zeigt.
Sch
alten Sie den Alarm ein, indem Sie den Schaltknopf an der Oberseite des Geräts hoch
ziehen.
4
Alarm ausschalten
Drü
cken Sie den Schaltknopf auf der Oberseite des Gerätes rein.
5
Snooze- und Lichtfunktion
Die Snooze/Licht-Taste befindet sich auf der Vorderseite des Weckers oben rechts.
Drücken Sie die Snooze/Licht-Taste und das Lämpchen oben links über dem Ziffernblatt
leuchtet während der Dauer des Tastendrucks.
Wenn
der Weckalarm ertönt, drücken Sie die Snooze/Licht-Taste und der Weckton wird
unter
brochen. Nach 4 Minuten ertönt der Weckalarm erneut.
Der
Weckalarm schaltet nach 18 Minuten von alleine aus.
Pflegehinweise
- Halten oder legen Sie das Gerät nie unter Wasser. Kommt das Gerät mit Wasser
in Berühurung, trocknen Sie es unmittelbar mit einem weichen Tuch.
- Lesen Sie die Betriebsanleitung genau durch vor Inbetriebnahme des Gerätes.
Gerätespezifikationen
Betriebstemperatur
-10
o
C +50
o
C
Genauigkeit (2.5V, 25
o
C)
+/- 30 Sek./Monat
Lebensdauer Batterie Ca. 1 Jahr
Bemerkungen:
Ger
ätefunktionen und die Bedienung des Weckers kann von dieser Bedienungsanleitung
ab
weichen. Sie können die neueste Anleitung kostenlos von unserer Website www.irox.com runter
la
den.
© Irox Development Technology www.irox.com
GO2
MANU
EL D’INSTRUCTIONS
Pour un usage de réveil à quartz
Caractéristiques
-
-
Le réveil à quartz G01 possède une fonction de réveil simple
Il affiche les heures, les minutes et les secondes
Clés
- Cadran de réglage de l’alarme
-
-
Fonc
tion d’éclairage et d’arrêt momentané (snooze)
Bouton d’
alarme ON/OFF
Mode d’emploi
1
Pour démarrer le réveil
Insérer une pile AA dans le logement de pile en respectant la polarité indiquée.
Le
réveil démarre automatiquement lorsque la pile est insérée.
2
Pour régler l’heure
Tirer sur le bouton à l'arrière du réveil. Tourner le bouton
pour
régler l’aiguille des heures et ses minutes à l’heure exacte. Ensuite, renfoncer
le
bouton.
3
Pour régler l’alarme
Fa
ire tourner le cadran de réglage de l’alarme dans le sens inverse des aiguilles d’une
montre et
gler l’aiguille d’alarme à l’heure désirée.
Placez l’interrupteur de l’alarme sur "ON” en faisant glisser
l’interrupteur “ON” vers le haut.
4
Pour arrêter l’alarme
Fa
ire glisser l’interrupteur de l’alarme ON/OFF vers le bas pour arrêter l’alarme.
5
Fonction d’éclairage et d’arrêt momentané (snooze)
La
fonction d’éclairage et d’arrêt momentané est active en pressant le bouton “Snooze &
Light”
situé dans l’angle supérieur droit à l’avant du réveil.
L’arrêt m
omentané durera environ 4 minutes et l’alarme s’arrêtera au bout de 18 minutes
environ.
Instructions de sécurité
- Ne pas plonger l’unité dans l’eau. Si l’unité entre en contact avec de l’eau,
séc
hez-la immédiatement avec un tissu doux.
- Lire le manuel d’instructions avec attention avant d’utiliser l’unité.
Spécifications du produit
Température de service
-10
o
C +50
o
C
Précision (2.5V, 25
o
C)
+/- 30 sec/mois
Durée de la pile Env. 1 an
Attention : Les spécifications techniques de ce produit peuvent éventuellement diverger du contenu de ce manuel. En
ca
s de difficulté d’utilisation de cet appareil, veuillez télécharger gratuitement la toute dernière version du manuel sur
Internet sur www.irox.com
© Irox Development Technology www.irox.com
GO2
ISTRUZIONI
PER L'USO
Sveglia al quarzo
Fun
zioni
- La sveglia al quarzo GO2 è dotata di una semplice funzione di sveglia.
- Indica le ore, i minuti e i secondi.
Tasti
- Ghiera per l'impostazione della sveglia
- Funzione snooze e illuminazione
- Tasto allarme ON/OFF
Come si usa
1
Avvio dell'orologio
Inserire una batteria AA nell'apposito vano, rispettando la polarità indicata.
Inserendo la batteria, l'orologio inizia a funzionare automaticamente.
2
Impostazione dell'ora
Estrarre il pomello sul retro della sveglia e ruotarlo
per impostare la lancetta delle ore e dei minuti sull'orario corretto.
Poi spingere nuovamente il pomello all'interno.
3
Impostazione della sveglia
Ruotare la ghiera per l'impostazione della sveglia in senso
antiorario e impostare la lancetta della sveglia sull'ora desiderata.
Impostare l'interruttore "ON" spingendolo verso l'alto.
4
Arresto della sveglia
Per spegnere l'allarme premere il tasto ON/OFF verso il basso.
5
Funzione snooze e illuminazione
La funzione snooze e illuminazione si attiva premendo l'apposito
tasto nell'angolo in alto a destra posto sulla parte anteriore della sveglia.
Il tempo di snooze dura circa 4 minuti, mentre l'allarme si arresta dopo 18 minuti circa.
Manutenzi
one
- Non mettere la sveglia nell'acqua. Se la sveglia viene a contatto con l'acqua,
asciugarla immediatamente con un panno morbido.
- Leggere accuratamente il manuale d'istruzioni prima di utilizzare la sveglia.
Specifiche del prodotto
Temperatura di funzionamento
-10
o
C +50
o
C
Precisione (2.5V, 25
o
C)
+/- 30 sec./mese
Autonomia batteria 1 anno circa
Nota: le specifiche tecniche di questo prodotto possono essere diverse dal contenuto del
pre
sente manuale. In caso di difficoltà nel funzionamento dell'apparecchio, è possibile scaricare
gratuitamente l'ultima versione del manuale al sito www.irox.com.
© Irox Development Technology www.irox.com
GO2
INSTRUC
TION MANUAL
Features
- GO2 quartz alarm clock has a simple wake-up alarm function
- Displays hour, minute and second
Keys
- Alarm setting bezel
- Snooze and light feature
- ON/OFF alarm button
How to use
1
To start the clock
Insert an AA Battery into the battery holder according to the indicated polarity.
The clock automatically starts when the battery is inserted.
2
To set the time
Pull out the knob at the back of the clock. Turn the knob
to s
et the hour and minute hands to the correct time. Then push
the
knob back.
3
To set the alarm
Rotate the
alarm setting bezel in anti-clockwise direction and set
th
e alarm hand to your desired time.
Set
the alarm switch "ON” by sliding the “ON switch in the
upward direction.
4
To stop the alarm
Push t
he alarm ON/OFF switch downward to stop the alarm.
5
To snooze and light feature
The snooze & light feature is enabled by pressing the Snooze & Light
Button at the u
pper right corner in front of the alarm clock.
The snoo
ze will last for about 4 minutes while the alarm will stop after about 18 minutes.
Care Instructions
- Do not put the unit in water. If the unit comes in contact with water, dry it
Imme
diately with soft cloth.
- Read instruc
tion manual thoroughly before operating the unit.
Product specifications
Operating temperature
-10
o
C +50
o
C
Accuracy (2.5V, 25
o
C)
+/- 30 secs/month
Battery life Approx. 1 year
Note: The technical specifications of this product may deviate from the content of this
man
ual. In case of difficulty in operating this device, you may download the latest
manu
al from the internet free of charge at www.irox.com
© Irox Development Technology www.irox.com
SIZE:290*245MM
白底印黑字


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox GO2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox GO2 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info