578950
5
Zoom out
Zoom in
Previous page
1/9
Next page
3. PUTTING INTO OPERATION
1. Put all radio sensors that you want to use into operation and place these in close proximity (1-2 metres) to the reception
device.
2. Open the battery compartment of the display device and remove all insulation strips. If no batteries are in the device, insert
the 2 batteries (UM-3 or ‘AA’ 1.5 V) in the correct polarity.
3. Now close the battery compartment.
4. Directly after the activation of the batteries, all segments are displayed for a few seconds on the display. The HT78 then
begins with the time at 0:00 and 1.1.08 and the search of available sensors on all 5 channels.
5. Now set the time and the date and reset all Min/Max memories with the CLEAR key. This guarantees that you will be able
to read the valid MIN/MAX recordings with a valid time/date.
6. As soon as the sensor is displayed correctly (see ‘Reception status’ in Chap., 4), you can set up the sensor in the place
where you want to effectively measure the outdoor temperature. Under the most ideal conditions, this can be up to 30 m
away. In reality, however, this is often less. In the event of problems, try out other places, and do so both for the sensor and
for the display device.
The radio sensor is weatherproof. Nevertheless, please place the sensor where possible in the dry and at any rate in the
shade.
4. RADIO THERMOMETER
The operation of the radio sensor supplied is described in the instructions which are delivered separately.
Other Irox radio sensors that are compatible with the HT78:
3 channels (can be used on the channels, 1, 2 or 3) : HTS12C, HTS33, HTS13, HTC13*
5 channels (can be used on all 5 channels) : HTS55
(*HTC13 is included in the scope of delivery of the HT78 and can be used on the channels 1-3)
With the sensors with thermo and hygrometer, simply only the temperature is displayed on the HT78.
Reception status display
The wave symbol indicates the status of the signal reception of the channel displayed.
Start search process for a sensor
Select the desired radio channel with the CHANNEL key.
Example: Channel 4 (the number 4 is flashing)
Now press and hold the SEARCH key until the wave symbol starts to flash. The device now searches for the sensor on
channel no. 4. This process can take a few minutes and is finished as soon as the wave symbol stops flashing.
We have deliberately ensured that the search channel can be individually called up per channel so that sensors that are
already logged in are not affected by subsequent enhancements.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox ET78 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox ET78 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox ET78

Irox ET78 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info